Panasonic DMC-FT4/DMC-TS4 VQT4E30 F0212MG0 User Manual

Recording Mode: 

Pictures are recorded continuously while moving the camera horizontally, two pictures 
selected automatically are combined to make a single 3D picture.
To view 3D pictures, a television that supports 3D is required. (This unit will play back in 
2D)
Refer to 

 for details about the playback method.

Press 3/4/2/1 to select [3D Photo Mode], and then press [MENU/

•

Description of recording method is displayed. To exit, press [MENU/SET].

•

A guide is displayed while recording.

•

Move the camera approximately 10 cm (0.33 feet) 

within approximately 4 seconds using the guide.

•

The 3D pictures are saved in MPO format (3D).

•

Zoom position is fixed to Wide.

•

The picture size is fixed to 2M (16:9).

•

The ISO sensitivity is automatically adjusted. However, the ISO sensitivity is increased to make 

the shutter speed become high-speed.

•

Motion pictures cannot be recorded during 3D Photo Mode.

•

Recording may not be possible depending on the recording conditions for the following cases. 

You may not get a 3D effect or the picture may be warped even if it was possible to record.

–

When the subject is too dark/bright

–

When the brightness of the subject changes

–

When the subject is moving

–

Not enough contrast

∫ Technique for taking 3D pictures

–

Take a picture of a subject that is not moving

–

Take a picture in a well-lit place, such as outdoors, etc.

–

Fix the focus and exposure by pressing the shutter button halfway, then press the shutter 

button fully and move the camera

–

When you start recording with the subject slightly to the right of the centre, the subject will 

be close to the centre in the final picture