Panasonic AG-HMC80P User Manual
38
Basic Operations
The images shot from when shooting starts
until it is stopped are recorded as one clip.
When recording is paused after a short period,
a small amount of time may be required after
pressing the START/STOP button to stop
recording before writing to the SD Memory
Card is terminated.
until it is stopped are recorded as one clip.
When recording is paused after a short period,
a small amount of time may be required after
pressing the START/STOP button to stop
recording before writing to the SD Memory
Card is terminated.
This means that operations cannot be
accepted if the START/STOP button is
pressed immediately.
The camera will read information from the
SD Memory Card immediately after the card
is inserted. Press the START/STOP button
to begin recording after (pause: green)
is displayed in the operation status display.
(Page 9 of Vol.)
pressed immediately.
The camera will read information from the
SD Memory Card immediately after the card
is inserted. Press the START/STOP button
to begin recording after (pause: green)
is displayed in the operation status display.
(Page 9 of Vol.)
AVCHD mode:
The camera’s factory default setting is PH
mode 1080/60i recording.
(To view current setting status: Page 11 of
Vol.)
The upper limit for the number of clips which
can be recorded on a single SD Memory Card
is 900. (However, this number may exceed
900 clips at times such as when shooting
immediately after the POWER switch has been
set to ON.)
Mosaic-like noise may appear on the playback
screen under the following shooting conditions:
mode 1080/60i recording.
(To view current setting status: Page 11 of
Vol.)
The upper limit for the number of clips which
can be recorded on a single SD Memory Card
is 900. (However, this number may exceed
900 clips at times such as when shooting
immediately after the POWER switch has been
set to ON.)
Mosaic-like noise may appear on the playback
screen under the following shooting conditions:
When there are complex patterns in the
background
When the camera is moved in large motions
or when it is moved very quickly
When a fast-moving subject has been recorded
(and especially when HE has been set as the
recording mode)
background
When the camera is moved in large motions
or when it is moved very quickly
When a fast-moving subject has been recorded
(and especially when HE has been set as the
recording mode)
DV mode:
The camera’s factory default setting is 480/60i
recording.
The upper limit for the number of clips which
can be recorded on a single SD Memory Card
is 999.
recording.
The upper limit for the number of clips which
can be recorded on a single SD Memory Card
is 999.
•
•
•
•
•
•
�
�
�
•
•
Checking photos taken (REC CHECK)
Press the REC CHECK/PHOTO SHOT button
(Page 0) while in recording standby mode. The
last two seconds of video and audio will be played,
and the camera returns to recording standby
mode.
(Page 0) while in recording standby mode. The
last two seconds of video and audio will be played,
and the camera returns to recording standby
mode.
Only the POWER and START/STOP buttons are
operable during REC CHECK.
The REC CHECK images are also recorded
when a device is connected to the camera and
backup images have been recorded.
The REC CHECK function does not work when
PB has been selected as the operation mode or
when connected to a computer.
This function also does not work after recording
if the REC FORMAT has been changed, or if the
camera has been set to CAMERA mode after
having switched to another mode (PB, PHOTO,
etc.).
This function does not work if the SD Memory
Card is removed and reinserted.
operable during REC CHECK.
The REC CHECK images are also recorded
when a device is connected to the camera and
backup images have been recorded.
The REC CHECK function does not work when
PB has been selected as the operation mode or
when connected to a computer.
This function also does not work after recording
if the REC FORMAT has been changed, or if the
camera has been set to CAMERA mode after
having switched to another mode (PB, PHOTO,
etc.).
This function does not work if the SD Memory
Card is removed and reinserted.
•
•
•
•
•
Basic shooting operations (continued)