Panasonic AG-HMC40P User Manual

106

Sets the rotation direction and the aperture control of the IRIS dial. (In 

MANUAL IRIS mode)

DOWN OPEN:   The iris opens when the IRIS dial is turned 

downward.

UP OPEN:   

 The iris opens when the IRIS dial is turned upward.

Selects the function assigned to the USER1 button.

INH: 

 

 

 No function assigned.

(PUSH)AF:   

 Switches to auto focus mode when the button is held 

during manual focus mode.

BACKLIGHT: 

 Auto iris control for the backlight compensation. 

(Page 47)

SPOTLIGHT:  

 Switches auto iris control for the spotlight on or off.

BLACKFADE:   Blackfade (Page 46)

WHITEFADE: 

 Whitefade (Page 46)

ATW:   

 

 Switches the ATW function on or off.

ATW LOCK:   

 Fixes the white balance value when the button is 

pressed during ATW. Press again to perform ATW.

 The gain mode switches between normal and high 

with each press of the button. Gain can be set to up 

to 34 dB in high gain mode. (Page 41)

D.ZOOM: 

 

 Changes the ratio of the DIGITAL ZOOM function. 

Each press of the button changes the ratio in the 

following order: OFF (x1) → x2 → x5 → x10 → OFF 

(x1). (Page 38)

EVF DTL:   

 Emphasizes outlines of images in the LCD monitor 

and viewfinder for easier focusing when the button is 

pressed.

SHOT MARK: 

 Shot mark recording (Page 47)

LAST CLIP:   

 Deletes the last recorded clip. (Page 49)

WFM:   

 

 Displays a waveform on the LCD monitor (only 

during CAMERA mode).

Assigns a function to the USER button.

The setting contents are the same as USER1 SW.

Assigns a function to the USER3 button.

The setting contents are the same as USER1 SW.

Selects whether to display the thumbnail indicator.

ON:  

Displayed

OFF: 

Not displayed

Assigns a function to the FOCUS ASSIST button.

EXPANDED: Displays the center of the screen in expanded view.

BAR:   

A bar extends to the right as focus is aligned.

BOTH:   

Enables both expanded view and focus bar display.

Assigns a function to the RING switch.

ZOOM:  Switch between FOCUS and ZOOM.

IRIS: 

Switch between FOCUS and IRIS.

Sets the face detection function during auto mode to ON or OFF.

: Enables face detection.

: Disables face detection.

        indicates the factory setting.

: Can also be configured in Quick Menu. (Page 96)