Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. HDC-SD9P
  5. User Manual

Panasonic HDC-SD9P User Manual

Download
Page of 144
103
VQT1N45
Setup
2
Connection and recognition
After the software applications are installed, this unit must be connected to the PC and be correctly 
recognized by the PC.
≥ Remove the supplied CD-ROM from your PC.
A USB cable (supplied)
1
Connect this unit to the AC 
adaptor.
≥ If a battery is used, operation is not possible 
when this unit is connected to a PC.
2
Turn on the unit.
≥ This function is available in all modes.
3
Connect this unit to a PC.
≥ Insert the USB connectors as far as they will go.
≥ Do not use any other USB connection cables 
except the supplied one. (Operation is not 
guaranteed with any other USB cables.)
4
Select [PC CONNECT] and press 
the cursor button.
≥ This unit is automatically detected by the PC.
≥ When the unit is connected to a PC, the 
operation mode cannot be changed and its 
power cannot be turned off.
Disconnect the USB cable, before turning 
this unit off (
l 103).
≥ Do not disconnect the USB cable or the AC 
adaptor while the card access lamp is on or 
card access icon (
) appears on the LCD 
monitor. Doing so may damage the data.
∫ If the driver has not been 
recognized properly
Use the following methods to enable it to be 
recognized.
Method 1:
Turn off the unit and your PC once and try 
verifying again.
Method 2:
Remove the SD card and try verifying again.
Method 3:
Try connecting the unit to another USB port on 
your PC.
∫ To disconnect USB cable safely
1
Double click the 
 (
) icon in task 
tray displayed on the PC.
≥ Depending on your PC’s settings, this icon 
may not be displayed.
2
Select [USB Mass Storage Device] and 
click [Stop].
3
Verify [MATSHITA HDC-SD9/SD USB 
Device] is selected and click [OK].
HDCSD9P-VQT1N45_ENG.book  103 ページ  ２００７年１２月２６日　水曜日　午後５時５７分