Panasonic DMC-FX150 User Manual

Page of 136
VQT1S88
14
Preparation
Inserting and Removing the Card (optional)/the 
Battery
Check that this unit is turned off.
We recommend using a Panasonic card.
Slide the release lever in the direction of 
the arrow and open the card/battery door.
Always use genuine Panasonic batteries 
(CGA-S005A).
If you use other batteries, we cannot guarantee 
the quality of this product.
Battery: Insert it fully being careful about 
the direction you insert it. Pull the lever 
A in the direction of the arrow to remove 
the battery.
Card: Push it fully until it clicks being 
careful about the direction you insert it. 
To remove the card, push the card until it 
clicks, then pull the card out upright.
B: Do not touch the connection terminals of the 
card.
The card may be damaged if it is not fully inserted.
1:Close the card/battery door.
2:Slide the release lever in the direction 
of the arrow.
If the card/battery door cannot be completely 
closed, remove the card, check its direction and 
then insert it again.
Note
Remove the battery after use. Store the removed battery in the battery carrying case (supplied).
Do not remove the battery until the LCD monitor and the status indicator (green) turn off as the 
settings on the camera may not be stored properly.
The supplied battery is designed only for the camera. Do not use it with any other equipment.
Before removing the card or battery, turn the camera off, and wait until the status indicator has 
gone off completely. (Otherwise, this unit may no longer operate normally and the card itself 
may be damaged or the recorded pictures may be lost.)
1
2
3
DMCFX150-VQT1S88_mst.book  14 ページ  2008年7月9日 水曜日 午後8時18分