Panasonic DMC-FX150 User Manual

Page of 136
VQT1S88
46
Advanced (Recording pictures)
[REC] mode: 
²
Taking Pictures with Exposure Set Manually 
(²: Manual exposure)
Determine the exposure by manually setting the aperture value and the shutter speed.
Slide the [REC]/[PLAYBACK] selector switch to [!], and then set the 
mode dial to [
²].
Press 
3/4 to select aperture or shutter 
speed, and press 
2/1 to set.
The aperture values given in the table above are values when the zoom position is at 
maximum Wide.
Depending on the zoom magnification, some of the aperture values cannot be selected.
Press [MENU/SET].
You can also press the shutter button halfway to finish.
Press the shutter button halfway.
The manual exposure assistance 
A appears for 
about 10 seconds to indicate the exposure.
Set the aperture value and the shutter speed again 
when the exposure is not adequate.
Manual setting screen is displayed when 
3 is 
pressed.
Take the pictures.
∫ Manual Exposure Assistance
Manual exposure assistance is an approximation. It is recommended to record by confirming in 
playback mode.
Note
Brightness of the LCD monitor may differ from the actual picture recorded. Please confirm in 
playback mode.
If the exposure is not adequate, the aperture value and the shutter speed turn red when the 
shutter button is pressed halfway.
Available Aperture Value
Available Shutter Speed (Sec)
(Per 1/3 EV)
F2.8
60 to 
1/1300
F9.0
60 to 
1/2000
The exposure is adequate.
Set to faster shutter speed or larger aperture value.
Set to slower shutter speed or smaller aperture value.
1
2
3
A
4
5
DMCFX150-VQT1S88_mst.book  46 ページ  2008年7月9日 水曜日 午後8時18分