Panasonic DMC-FT5/DMC-TS5 User Manual
- 182 -
Wi-Fi
Connecting Easily to a Smartphone/tablet (NFC)
Using the NFC “Near Field Communication” function, you can easily transfer data necessary
for a Wi-Fi connection between this camera and the smartphone/tablet.
for a Wi-Fi connection between this camera and the smartphone/tablet.
You can use the following functions by controlling this camera remotely with your smartphone/
tablet.
tablet.
–
Remote recording
–
Playing back the pictures in the camera
–
Saving the pictures in the camera to the smartphone/tablet, or sending them to WEB services.
–
Sending the acquired location information to the camera.
1
Launch “Image App” on your smartphone/tablet.
2
Touch the smartphone/tablet to [
] of the camera.
•
This function can be used even while the camera is
turned off.
turned off.
3
When the connection confirmation screen is
displayed, press 2/1 to select [Yes], and then
press [MENU/SET].
displayed, press 2/1 to select [Yes], and then
press [MENU/SET].
4
Touch the smartphone/tablet to [
] of the camera
again.
•
•
When the smartphone/tablet has connected, an image of
this
this
camera
will be displayed on the smartphone/tablet.
•
The connected smartphone/tablet is registered to this
camera
. A connection can be established with the
operation of steps
1
and
2
from the second time
onwards.
•
You can register up to 20 smartphones/tablets. When the number exceeds 20, registrations will be
deleted, starting from the oldest touched one.
deleted, starting from the oldest touched one.
•
Performing [Reset Wi-Fi Settings] will delete the smartphone/tablet registration.
∫
Compatible models
This function can be used with the NFC compatible device with Android (OS version 2.3.3 or
higher). (excluding some models)
higher). (excluding some models)
Controlling this camera remotely with a smartphone/tablet by using the NFC
function
function
Preparation:
(On the camera)
•
•
Set [NFC Operation] to [ON].
(On your smartphone/tablet)
•
•
Check that your smartphone/tablet is a compatible model.
•
Turn on the Wi-Fi function.
•
Install the “Image App” in advance.