Panasonic AG-HPX250EN User Manual

44

This function is used to start recording a certain
number of seconds (approx. 3 seconds for HD
recordings or approx. 7 seconds for SD recordings)
before actual recording starts.

• Refer to the section “Using the setup menus”

(Page 28 of Vol. 1) for menu operation.

• The following indications appear in the

special recording display area in the
viewfinder or LCD monitor.

During recording: “P-REC” stays lit.
During a pause: “P-PAUSE” stays lit.

• “Screen displays” (Page 121)

This setting will record audio and video a time
period prior to start of recording.
• The following recording modes will disable

the pre-recording function and start
respective recording function when selected.

· Recording of video input via the IEEE1394

connector

· When changing recording formats
· After a change from playback to recording
· During interval recording
· During one-shot recording
· During loop recording

• There may be a short delay in start of audio

and video recording when the START/STOP
button is pressed directly after switching from
thumbnail display or playback to view what
you are shooting, after turning the power on
and after changing the PREREC MODE.

This function is used to record 1 frame at the time
interval set in the INTERVAL TIME item.

• Refer to the section “Using the setup menus”

(Page 28 of Vol. 1) for menu operation.

• The camera-recorder will repeat 1-frame

recording for the time interval set in the
INTERVAL TIME option.

• Push the Operation lever in the  direction

(STOP) to stop recording.

• To cancel this function, turn the camera-

recorder off or select NORMAL in the REC
FUNCTION option.

• The following indications appear to the left of

the operation status display.

· During recording: “I-REC” stays lit.
· During a pause: “I-PAUSE” stays lit.

When a setting of less than 2 seconds is
made in step 3, “I-REC” blinks according to
time setting during recording.

· When stopped: “I-” in “I-PAUSE” blinks.