Panasonic DMC-GH4H User Manual

Page of 128
115
Others
 (ENG) VQT5H82
Cautions for Use
Please also refer to the “Operating Instructions for advanced features (PDF format)”, which 
describes more detailed information.
Keep this unit as far away as possible from electromagnetic equipment (such as 
microwave ovens, TVs, video games etc.).
Do not use this unit near radio transmitters or high-voltage lines.
If you record near radio transmitters or high-voltage lines, the recorded pictures and/or sound 
may be adversely affected.
Always use the supplied cords and cables.
If you use optional accessories, use the cords and the cables supplied with them.
Do not extend the cords or the cables.
Do not spray the camera with insecticides or volatile chemicals.
If the camera is sprayed with such chemicals, the body of the camera may be damaged and the 
surface finish may peel off.
Do not keep rubber or plastic products in contact with the camera for a long period of time.
Before cleaning the camera, remove the battery or the DC coupler (DMW-DCC12: 
optional), or disconnect the power plug from the outlet. Then wipe the camera with 
a dry, soft cloth.
When the camera is soiled badly, it can be cleaned by wiping the dirt off with a wrung wet cloth, 
and then with a dry cloth.
Wipe off any dirt or dust on the zoom ring and the focus ring with a dry, dustless cloth.
Do not use solvents such as benzine, thinner, alcohol, kitchen detergents, etc., to clean the 
camera, since it may deteriorate the external case or the coating may peel off.
When using a chemical cloth, be sure to follow the accompanying instructions.
∫ About dirt on the image sensor
This camera features an interchangeable lens system so dirt may get inside the camera 
body when changing lenses. Depending on the recording conditions, dirt on the image 
sensor may appear on the recorded picture.
To prevent debris or dust adhering to internal parts of the body, avoid changing the lens in 
a dusty environment and always fit the body cap or a lens when storing the camera. 
Remove any dirt on the body cap before attaching it.
Optimal use of the camera
Cleaning
Dust reduction function
This unit has a dust reduction function that will blow off the debris and dust that have 
affixed to the front of the imaging device.
This function will function automatically when the camera is turned on, but if you see 
dust, perform the [Sensor Cleaning] in the [Setup] menu.
DMC-GH4H&GH4_EB-VQT5H82_eng.book  115 ページ  2014年3月24日 月曜日 午後6時18分