Panasonic AG-HPG10P User Manual
16
Basic operations
Hold down [POWER] for at least 2 seconds.
• The power lamp lights, and the power is turned on.
• When [POWER] has been held down for more than 2 seconds while the power is on, the power lamp will
• The power lamp lights, and the power is turned on.
• When [POWER] has been held down for more than 2 seconds while the power is on, the power lamp will
go off, and the power will be turned off.
Turning the power on and off
1
Hold down [POWER] for at least 2 seconds to turn the power on.
2
Raise the LCD monitor while pressing the LCD monitor open button in the direction shown by
the arrow.
the arrow.
AG-HPG10
AG-HPG1
0
3
Set the LCD screen to the angle where it is easiest to see its displays.
AG-HPG1
0
AG-HPG1
0
Make sure that the LCD monitor is raised upright before turning it.
Using the LCD monitor
The LCD monitor can be
turned 90 degrees to the
right.
• The monitor cannot
turned 90 degrees to the
right.
• The monitor cannot
be turned more than
90 degrees. Applying
excessive force beyond
this limit may cause
trouble in the unit.
90 degrees. Applying
excessive force beyond
this limit may cause
trouble in the unit.
The LCD monitor can be
turned 180 degrees to
the left.
• The monitor cannot
turned 180 degrees to
the left.
• The monitor cannot
be turned more than
180 degrees. Applying
excessive force beyond
this limit may cause
trouble in the unit.
180 degrees. Applying
excessive force beyond
this limit may cause
trouble in the unit.
180º
90º