Pentax WG-3 GPS User Manual

3

The image appears on the display temporarily (Instant Review) immediately after 
it is captured. If the camera detects that the subject’s eyes are closed while Face 
Detection (p.100) is activated, the message [Closed eyes have been detected] 
appears for 3 seconds (Blink Detection).

You can use the zoom to change the captured area.

1

Press the W/T button in A mode.

W Wide (left)
Widens the area that is captured by the 
camera.
T Tele (right)
Enlarges the subject.

If you continue to press T, the camera 
automatically switches from optical zoom to 
Intelligent Zoom and stops at the point where 
the zoom switches to digital zoom.
Once the button is released and pressed again, the camera switches to digital 
zoom.
If the digital zoom is set to off in the menu, the optical zoom and the Intelligent 
Zoom ranges are available for use. The zoom ratio of the Intelligent Zoom varies 
depending on the number of recorded pixels.

• When the Face Detection function does not work, Blink Detection also does 

not function. Even if the subjects’ faces are recognized, Blink Detection 
may not function depending on the condition of the recognized faces.

• You can also disable the Blink Detection function (p.102).

3 button

W/T button

Four-way controller
4 button

Zoom bar

Zoom ratio