Panasonic AG-AC130P User Manual

32

When memory cards are inserted in both of the two slots, activating this function enables recording the 
same video to both the memory cards. Set the [SIMUL REC] item on the setup menu [RECORDING 
SETUP] screen to [ON] to enter the SIMUL REC mode.
In the media capacity display on the screen, the available recording time possible for SIMUL REC (the 
available recording time of the memory card with lower memory capacity) is displayed, and the icon  
[

] is displayed.

 

•

Recording stops when one of the memory cards in Slot 1 or Slot 2 has no remaining space. 
(The following figure shows the case that the memory card in Slot 1 becomes full.)

If you press the <START/STOP> button without replacing the memory card in Slot 

1, video will be recorded normally on the memory card in Slot 2 (the memory card 

with remaining memory).

When the capacity of Slot 1 (the memory card with 

lower remaining memory) becomes full, SIMUL REC 

will stop.

To resume the SIMUL REC, replace the memory card 

to a new memory card and press the 

<START/STOP> button.

• SIMUL REC cannot be used at the same time as relay recording or INTERVAL REC.
• During SIMUL REC, if recording has stopped because a recording error has occurred in one of the 

memory cards, the other memory card will continue to record.

• After SIMUL REC ends, when there is capacity remaining on one of the memory cards, that memory 

card will automatically be selected as the memory card for recording. Press the <START/STOP> 
button again for normal recording.

• While in SIMUL REC mode, if only one memory card is inserted, normal recording takes place.
• After SIMUL REC, the REC CHECK function does not operate.
• After SIMUL REC, the [LAST CLIP] function does not operate.
• When switching to <PB> mode after SIMUL REC, the thumbnails of the memory card in slot 1 will be 

displayed.