Panasonic HC-V250P/PC User Manual
15
(ENG) SQT0003
Inserting/removing an SD card
When using an SD card not from Panasonic, or one previously used on other equipment, for the first
time on this unit, format the SD card. (l 23) When the SD card is formatted, all of the recorded data
is deleted. Once the data is deleted, it cannot be restored.
Caution:
Check that the access lamp has gone off.
time on this unit, format the SD card. (l 23) When the SD card is formatted, all of the recorded data
is deleted. Once the data is deleted, it cannot be restored.
Caution:
Check that the access lamp has gone off.
You can turn the unit on and off using the power button or by opening and closing the LCD monitor.
Open the LCD monitor and press the power button to turn on the unit.
A
The status indicator lights on.
The unit is turned on when the LCD monitor is opened, and unit is turned off when it is closed.
1
Open the SD card cover and insert (remove) the SD card into (from) the
card slot B.
card slot B.
≥ Face the terminal side C in the direction shown in the illustration and press it straight in as far
as it will go.
≥ Press the center of the SD card and then pull it straight out.
2
Securely close the SD card cover.
≥ Securely close it until it clicks.
Preparation
Turning the unit on/off
Turning the unit on and off with the power button
Access lamp
[ACCESS] A
[ACCESS] A
≥ When this unit is accessing
the SD card, the access
lamp lights up.
lamp lights up.
To turn off the unit
Hold down the power button until the status
indicator goes off.
indicator goes off.
HC-V550&V250P&PC-SQT0003_mst.book 15 ページ ２０１３年１２月２４日 火曜日 午後５時２５分