Panasonic AG-3DA1P User Manual

43

PUSH

Pressing the DISP/MODE CHK button during 
recording or while recording is paused will 
remove all displays from the screen except 
for the operation status, counter, and warning 
display. Press the button again to return to the 
normal display. (Page 74)

The normal display is resumed when the power 
is turned on.

During recording or while recording is paused, 
information such as recording functions setting 
status and a list of functions allocated to the 
USER buttons can be displayed by keeping the 
DISP/MODE CHK button held down. Release the 
button to return to the normal display.

Pressing the DISP/MODE CHK button while the 
thumbnail screen is displayed in PB mode will 
display the properties of the selected clip. 
(Clips can be selected by moving the cursor with 
the Operation lever.)

•

You can allocate one of three features to each of 
the USER 1,  buttons. 
For details, see the setup menus, SW MODE 
screen, USER1 and USER. (Page 79)

If you press a USER button to which one of the 
functions has been allocated and then turn off 
the power, the added effect to the image will not 
be retained.

Press the BARS button in the CAMERA mode 
to output a color bar screen to a television or 
monitor so you can adjust them. Press the button 
again to turn the feature off.

While the color bar is displayed, a test tone of  
1 kHz

*

 will be output from the headphone 

terminal, the HD SDI terminals or the HDMI 
terminal. There will be no speaker output. 

*

 997 Hz when SYSTEM FREQ is set to 50 Hz

The color bar can be recorded by pressing the 
START/STOP button.
The BARS button does not work in the PB 
mode.
The color bar display is canceled when the 
power is turned off.

•

•

•

•

•