Philips AG-HPX170P User Manual

Men

u

(MCR)

Sets the audio signals to output from the AUDIO OUT pin jack when 

the P2 card or the tape is played back.
CH1 · CH: 

CH1 output = CH1 signals, CH2 output = CH2 signals
CH1: 

CH1 output = CH1 signals, CH2 output = CH1 signals
CH: 

CH1 output = CH2 signals, CH2 output = CH2 signals
CH · CH: 

CH1 output = CH3 signals, CH2 output = CH4 signals
CH:  

CH1 output = CH3 signals, CH2 output = CH3 signals
CH: 

CH1 output = CH4 signals, CH2 output = CH4 signals

(Camera)

(MCR)

Selects the type of component terminal or SDI connector.

AUTO: Monitor with D4 terminal (720P/1080i/480i output)

1080i: Monitor with D3 terminal (1080i/480i output)

80i: Monitor with D1 terminal (480i output)

Only video recorded at 720P is cross-converted to 1080i. Cross-

conversion does not take place in other cases.

(Camera)

(MCR)

Selects video output from component terminal or SDI OUT terminal.

ON: Video is not output via the component terminal but from the SDI 

connector. 

OFF: Video is output via the component terminal but not from the SDI 

connector.

(Camera)

(MCR)

Determines whether or not metadata is superimposed on SDI signals 

during HD-SDI output.

ON: Superimposes metadata.

OFF: Does not superimpose metadata.

(Camera)

(MCR)

Determines whether or not EDH is superimposed on SD-SDI signals 

during SD-SDI output.

ON: Superimposes EDH.

OFF: Does not superimpose EDH.

(Camera)

(MCR)

Switches down-conversion output mode.

SIDE CROP: Crops the right and left edges of the images with the 4:3 

aspect ratio.

LETTER BOX: Adds black bands at the top and bottom of the images, 

and the images with the 16:9 aspect ratio are displayed in the 4:3 

aspect ratio.

SQUEEZE: Select this option for 16:9 aspect ratio images. When 

viewed on a 4:3 aspect ratio monitor, images are squeezed horizontally.

(Camera)

Selects the sound heard through the headphones.
LIVE: 

The sound which has been input from the microphone is output as is. 

This setting is selected when delays in the sound are annoying.
RECORDING: 

The sound in the status which is to be recorded (the sound 

synchronized with the images) is output.

(Camera)

Determines whether or not a test tone is output to channels 1, 2, 3 and 

4 when BARS is set to ON.

ON: Outputs a test tone to channels 1, 2, 3 and 4.

The reference level is -12 dB.

OFF: Does not output a test tone.

•

___indicates the factory setting.