Panasonic SV-AV50 User Manual

Recording Pictures supplied

from an external device

Turn the SD Video Camera off and put in
the USB Cradle. (l 10)

Connect the [AV IN/OUT] terminal of the
USB Cradle to the AV Output Sockets of the

external device

using supplied AV Cable

Turn on the SD Video Camera and set the
Record/Play mode Switch to [

] and

then, set the operation mode to
[PICTURE] or [MPEG4].

Press the [MENU] Button and then, select
[Setup] and press the Jog Ball.

Set [Input select] to [Line] and press the
[MENU] Button.

≥The [

] indication appears.

Select desired image quality. (l 22, 24)

Press the [MENU] Button.

Set up the external device.

≥Confirm that the image or sound signal is input

into the SD Video Camera.

≥In the [MPEG4] mode, when rotating the Zoom

Lever to [W], you can mute the sound from the
speaker. (The volume of the sound cannot be
changed. You can output the sound again when
rotating the Zoom Lever to [T].)

Press the Recording Start/Stop Button.

≥Recording starts.
≥When the moving picture is being recorded,

press the Recording Start/Stop Button again to
stop recording.

≥While this camera can record audio from an external

device, the audio connection should only be
connected to the “line” output of the external device.
This is normally an “RCA” type of connector. Do not
attempt to connect audio directly from the
speaker output of any device. Doing so will cause
serious damage to this device.

5672

1HH

.KPG

ȕǩȸȞȃȈ

$GGR

+PRWVUGNGEV

#WVQRQYGTQP

1HH

5,6

MODE

DC IN 4.8V

AV IN/OUT

AV50PP_ENG.book 40 ページ２００３年１１月２６日　水曜日　午後３時１７分