Pelco C2910M-A (4/05) User Manual

 

C2910M-A (4/05)

9

 

The CCC5100H Series camera supports both manual and DC-drive auto iris lenses, either fixed focal length or varifocal. The camera accepts both 
CS- and C-mount lenses without a mount adapter.

 

DC-drive auto iris lenses are controlled through the four-pin drive connector (type D4-152N). Figure 2 identifies the pin connections for the auto 
iris lens connector on the back of the camera.

 

DC-Drive Auto Iris Lens Connections (Camera Connector)

 

1. Use clean, compressed air to make sure there is no dust or other foreign matter between the lens and the camera imager.

2. Screw the lens onto the lens mount.

3.

 

Connect the four-pin connector from the lens to the connector on the back of the camera.

 

Mounting Lens to Camera

 

  The CCC5100H Series camera does not support video-drive auto iris lenses.

1

2

3

4

1

Control coil negative (-)

2

Control coil positive (+)

3

Drive coil positive (+)

4

Drive coil negative (-)

C/CS LENS

AUTO IRIS
LENS CABLE
AND CONNECTOR
(OPTIONAL)