Panasonic 1AG6P1P6073-S User Manual
VQT2Z95
63
≥ Do not allow dirt, dust or water to get into the terminals on the back of
the SD card and do not touch the terminals with your fingers.
When disposing of or giving away the SD card, note that:
Formatting and deletion of this unit or computer only changes the
file management information and does not completely delete the
data in the SD card.
file management information and does not completely delete the
data in the SD card.
It is recommended to physically destroy the SD card or use the
commercially available computer data deletion software to
completely erase the data in the SD card before transferring to
another party or disposing.
The customer is responsible for the management of the data in the
SD card.
commercially available computer data deletion software to
completely erase the data in the SD card before transferring to
another party or disposing.
The customer is responsible for the management of the data in the
SD card.
≥ The battery should be stored in a cool place free from humidity, with as
constant temperature as possible. (Recommended temperature: 15 °C
to 25 °C (59 °F to 77 °F), Recommended humidity: 40%RH to 60%RH)
to 25 °C (59 °F to 77 °F), Recommended humidity: 40%RH to 60%RH)
≥ Always remove the battery and the SD card from the unit.
≥ If the battery is left attached, a minute amount of current continues to
≥ If the battery is left attached, a minute amount of current continues to
flow even if the unit is off. Keeping the unit in this state may result in
over discharge of the battery. This may result in you not being able to
use the battery even after it is charged.
over discharge of the battery. This may result in you not being able to
use the battery even after it is charged.
≥ When storing the battery for a long period of time, we recommend
charging it once a year. Remove the battery from the unit and store it
again after it has completely discharged.
again after it has completely discharged.
≥ When storing the unit in a cupboard or cabinet, it is recommended that
you place a desiccant (silica gel) in with it.
≥ Condensation occurs when the ambient temperature or humidity
changes. Be careful of condensation since it causes lens stains,
fungus and unit malfunction.
fungus and unit malfunction.
≥ If condensation occurs, turn the unit off and leave it for about 2 hours.
The fog will disappear naturally when the temperature of the unit
becomes close to the ambient temperature.
becomes close to the ambient temperature.
When not using the unit for a long period of time
About condensation
HM-TA1_PP-VQT2Z95_mst.book 63 ページ ２０１０年７月２７日 火曜日 午後９時２０分