Panasonic AG-AC130AP User Manual
42
Storing scene files and other settings on memory cards
You can save up to four scene file settings or other
settings as files on a memory card, and you can
also load them from the memory card.
settings as files on a memory card, and you can
also load them from the memory card.
•
In the case of the scene files, the current settings
are automatically saved in the camera, and the
saved data is written on a memory card. When
the data has been read from a memory card, the
current settings are rewritten at the same time as
the data saved inside the camera.
are automatically saved in the camera, and the
saved data is written on a memory card. When
the data has been read from a memory card, the
current settings are rewritten at the same time as
the data saved inside the camera.
•
The data in all the scene files, <F1> to <F6> is
rewritten.
rewritten.
The following description basically describes
storing scene files.
storing scene files.
1
Turn the POWER/MODE switch of the
camera <ON>. (Page 27 of Vol.1)
2
Select the slot number for the memory card
onto which you wish to save from the [CARD
WRITE] item on the setup menu [SCENE
FILE] screen, and push the OPERATION
lever.
For other settings, select the [USER FILE]
screen. (Page 92)
screen. (Page 92)
•
Menu operation (Page 28 of Vol.1)
•
Operations may be performed with buttons on
the remote control that correspond to those on
the camera. For details, see “Remote control”
(Page 21 of Vol.1).
the remote control that correspond to those on
the camera. For details, see “Remote control”
(Page 21 of Vol.1).
3
Tilt the OPERATION lever in the < >< >
< >< > directions, select a file, and push
the OPERATION lever to set the file name.
4
Push the OPERATION lever again, select
[YES] when the following screen appears,
and push the OPERATION lever.
•
In the following example, [SCENE-01] is the
TITLE name. To change the TITLE name, see
the following description.
TITLE name. To change the TITLE name, see
the following description.
•
“FILE 1 (file name) WRITE COMPLETED” is
displayed when writing is complete.
displayed when writing is complete.