Panasonic AG-AC90APX User Manual

- 78 -

Connecting with a HDMI cable

Select the desired method of HDMI output.

* This is displayed only in Playback Mode.
≥ [AUTO] determines the output resolution automatically based on information from the connected

TV.
If the images are not output on the TV when the setting is [AUTO], switch to the method [1080p],
[1080i], [720p] or [480p] which enables the images to be displayed on your TV. (Please read the
operating instructions for the TV.)

≥ The image quality of [AUTO] differs from that of [1080p], [1080i], [720p] and [480p].
≥ Images may not be displayed on the television for several seconds in some cases, such as when

changing between scenes.

≥ When a scene recorded in [PM 720/60p] is played back on the TV, even if [HDMI RESOLUTION]

is set to [1080p], the scene will be output in [720p].

Listening in 5.1 channel sound

The audio recorded with the built-in microphone can be played back as 5.1 ch audio by connecting
this unit with a 5.1 ch compatible amplifier or TV using a HDMI cable.
For connecting this unit with an AV amplifier or a TV, refer to operating instructions of the AV
amplifier or the TV.
≥ The audio recorded with [MIC SETUP] set to [2ch] will be in stereo (2 ch).

Connecting with the AV multi cable

AV multi connector output setting can be changed.

Changing the component output setting

: [OTHER FUNCTION]

# [HDMI RESOLUTION] # [AUTO]/[1080p]/[1080i]/[720p]*/

[480p]

: [OTHER FUNCTION]

# [AV MULTI] # desired setting

[COMPONENT]:

When connecting to the component terminal

[AV OUT]:

When connecting to the video terminal

: [OTHER FUNCTION]

# [COMPONENT OUT] # desired setting

[480i]:

When connecting to the component terminal on the TV compatible with 480i.
(Playback is in standard quality.)

[1080i]:

When connecting to the component terminal on the TV compatible with 1080i.
(Playback is in high definition quality.)

AG-AC90A-SQT0333_mst.book 78 ページ２０１４年５月１４日　水曜日　午前１０時３６分