Panasonic 1AG6P1P6073-A User Manual
18
VQT2Z95
Caution:
Check that the status indicator has gone off.
1
Open the card/battery door and insert (remove) the
SD card into (from) the card slot
SD card into (from) the card slot
B.
≥ Face the label side C in the direction shown in the illustration and
press it straight in as far as it will go.
≥ Press the center of the SD card and then pull it straight out.
2
Securely close the card/battery door.
≥ Do not touch the terminals on the back of the SD card.
≥ Do not apply strong shocks, bend, or drop the SD card.
≥ Electrical noise, static electricity or the failure of this unit or the SD card
≥ Do not apply strong shocks, bend, or drop the SD card.
≥ Electrical noise, static electricity or the failure of this unit or the SD card
may damage or erase the data stored on the SD card.
≥ When the status indicator is lit, do not:
j Remove the SD card
j Turn the unit off
j Insert and remove the USB terminal
j Expose the unit to vibrations or shock
Performing the above while the lamp is on may result in damage to
data/SD card or this unit.
j Turn the unit off
j Insert and remove the USB terminal
j Expose the unit to vibrations or shock
Performing the above while the lamp is on may result in damage to
data/SD card or this unit.
≥ Do not expose the terminals of the SD card to water, dirt or dust.
Inserting/removing an SD card
When using an SD card not from Panasonic, or one previously used
on other equipment, for the first time on this unit, format the SD card.
(
on other equipment, for the first time on this unit, format the SD card.
(
l 35) When the SD card is formatted, all of the recorded data is
deleted. Once the data is deleted, it cannot be restored.
Status indicator
A
≥ When this unit is
accessing the SD card,
the status indicator
lights up.
the status indicator
lights up.
HM-TA1_PP-VQT2Z95_mst.book 18 ページ ２０１０年７月２７日 火曜日 午後９時２０分