Panasonic AG-AC160AEN User Manual

91

<CAMERA> Selects the correction mode of the internal time code when the time code of the 

internal time code generator is recorded.
[DF]: Uses the drop frame mode.
[NDF]: Uses the non-drop frame mode.

 

•

Automatically set to [NDF] when you set the recording frame rate of the 

recording format to 24P.

 

•

Enabled only when [SYSTEM FREQ] = [59.94Hz].

<CAMERA> Sets the mode in which you advance the internal time code generator.

[FREE RUN]: The time code is advanced regardless of the operation mode. A 

slight time error may occur when switching to <PB> mode if the 

frame rate is set to 24P.

The time code is advanced when shooting.

<CAMERA> Sets the initial time code.

When you set the frame rate of the recording format to 24P, set the frame value 

to 0 or a multiple of 4 in AVCHD mode and to 5 frame units in DV mode. If any 

other value is set, the recorded time code will mismatch.

Sets the content to be recorded as the user information.
[USER]:

Records the user information.

The time is recorded.

The date and time are recorded.

Records the value of the time code generator.

[FRAME RATE]: Records the frame rate information of frame conversion.

<CAMERA> Sets the user information.

[EXT TC LINK] <CAMERA> Synchronizes the initial time code value during multi-camera shooting. ([SLAVE] 

camera time codes are synchronized to the [MASTER] internal [TCG] value.)
[MASTER]:

Sets the mode to master mode.

Sets the mode to slave mode. When the <RESET/TC SET> 

button is pressed, input time codes are synchronized to the 

internal [TCG].

[NO]: Returns to the previous screen.

 

•

[MASTER] and [SLAVE] mode settings are in effect only when this menu is 

open. When the menu is closed, [EXT TC LINK] is automatically canceled.

         is the factory default mode.