3com iCV-01a User Manual
Chapter 2: Hardware Setup
Chapter 2: Hardware Installation
The following details the hardware installation procedure for WebCAM IP camera.
Step 1:
Connect the PC camera into the USB
port of WebCAM.
port of WebCAM.
Step 2:
Connect the WebCAM to LAN by using
the Ethernet UTP port.
the Ethernet UTP port.
Step 3:
Connect DC power adapter output into
WebCAM socket, and plug the DC
power input into the wall socket
WebCAM socket, and plug the DC
power input into the wall socket
Step 4:
Wait a moment and the LCD will
display the IP Address, Subnet and
Gateway. Use a Browser to log into
WebCAM Web Interface
display the IP Address, Subnet and
Gateway. Use a Browser to log into
WebCAM Web Interface
The
icon on the LCD shows that
a USB camera is connected.
The LCD display shows that two USB
cameras are attached to the WebCAM.
cameras are attached to the WebCAM.
WebCAM - user manual
-4-