3com iCV-01a User Manual

Siemens (http://www.speedstream.com) 

 

SpeedStream 2602 – 2-Port DSL/Cable Router 

SpeedStream 2623 – Wireless DSL/Cable Router 

SpeedStream 2624 – Wireless DSL/Cable Router 

 

1. Log into your router using your router IP. 

 

2. After you are logged in, click on Advanced Setup -> Virtual Servers. 

 

3. Enter the following information on the page: 

Line #1: 

Private 

IP: 

Type in the camera’s IP address, for example: 
192.168.0.5 (Look at WebCAM’s IP Address LCD 
display for the last 3 digits of the camera’s IP address)

Private Port: 

80 

Type: TCP 

Public Port: 

80 

 

Line #2 

Private 

IP: 

Type in the camera’s IP address, for example: 
192.168.0.5 (Look at WebCAM’s IP Address LCD 
display for the last 3 digits of the camera’s IP address)

Private Port: 

9001 

Type: UDP 

Public Port: 

9001 

 

4. Click Enter to save the settings. WebCAM should now be configured to work with 
your router and be accessible from the internet. 

 

SpeedStream 2604 – 4-port DSL/Cable Router 

 

1. Log into your router using your router IP. 

 

2. After you are logged in, click on Advanced Setup -> Virtual Servers. 

 

3. Under the Properties section, there are a few entries you’ll need to add. Check in 
the checkbox for Enable. 

 

4. Under the first box, next to the Enable checkbox, type in: WebCAM Web. 

 

5. Under PC (Server), select your camera or the camera’s IP address from the list. If 
the camera is not listed, select the link titled “My PC is not listed.” 

 

6. Leave Protocol as TCP.