Philips SDR-S50 User Manual
92
VQT2L35
With a PC
Setup
2
Connecting to a PC
≥ Connect this unit to the PC after the software applications are installed.
≥ Remove the supplied CD-ROM from your PC.
≥ Remove the supplied CD-ROM from your PC.
A USB cable (supplied)
1
Connect this unit to the AC
adaptor.
adaptor.
≥ It is possible to use it connected to the PC
with the batteries only, but you will not be
able to write data into the unit.
able to write data into the unit.
≥ Use the AC adapter to free you from
worrying about the battery running down.
2
Turn on the unit.
≥ This function is available in all modes.
≥ When using the battery, the LCD monitor
≥ When using the battery, the LCD monitor
will be turned off after about 5 seconds.
Operating the joystick will cause the LCD
monitor to turn on again.
Operating the joystick will cause the LCD
monitor to turn on again.
3
Connect this unit to a PC.
≥ Insert the USB connectors as far as they
will go.
≥ Do not use any other USB cables except
the supplied one. (Operation is not
guaranteed with any other USB cables.)
guaranteed with any other USB cables.)
≥ The Smart wizard screen is automatically
displayed when VideoCam Suite 3.0 is
installed.
installed.
≥ This unit is automatically recognised as an
external drive of the PC. (l 94)
≥ A USB function selection screen will be
displayed if VideoCam Suite 3.0 has not
been installed. Use the joystick to select
[PC], then press the centre of the
been installed. Use the joystick to select
[PC], then press the centre of the
joystick.When you select an option other
than [PC], reconnect the USB cable.
than [PC], reconnect the USB cable.
≥ When Windows is used as the PC
operating system, a message prompting
to format may display when a SDXC card
is read. (Please be aware that if a media is
formatted, then all the data recorded on
the media will be erased.)
http://panasonic.net/avc/sdcard/
information/SDXC.html
to format may display when a SDXC card
is read. (Please be aware that if a media is
formatted, then all the data recorded on
the media will be erased.)
http://panasonic.net/avc/sdcard/
information/SDXC.html
≥ When the unit is connected to a PC its
power cannot be turned off.
Disconnect the USB cable, before
turning this unit off.
Disconnect the USB cable, before
turning this unit off.
≥ Do not disconnect the USB cable or the
AC adaptor while the access lamp is on or
card access icon (
card access icon (
) appears on the
unit screen.
≥
Do not disconnect the USB cable or the
AC adaptor while the HDD access lamp is
on or HDD access icon (
AC adaptor while the HDD access lamp is
on or HDD access icon (
) appears on
the unit screen.
≥ When performing reading/writing between
a PC and an SD card, be aware that some
SD card slots built into PCs and some SD
card readers are not compatible with the
SDHC memory card or SDXC memory
card.
SD card slots built into PCs and some SD
card readers are not compatible with the
SDHC memory card or SDXC memory
card.
SDR-H85
SDRS50&H85GN-VQT2L35_mst.book 92 ページ ２００９年１２月２９日 火曜日 午前１０時３０分