Sharp DSR-PD150P User Manual

You can get your desired audio quality, connecting multiple microphones or an
optional microphone to your camcorder.

(1) Loosen the microphone holder screw and open the cover.
(2) Detach the supplied microphone and unplug the cable from the camcorder.
(3) Connect the microphone (not supplied) to the INPUT1 or INPUT2 connector.
(4) Select the channel to be used, using the REC CH SELECT switch. Used

channels according to the position of the REC CH SELECT switch are as
follows:

INPUT1

CH1

Channel 1

CH1•CH2

Channels 1/2

INPUT2

CH1

Channel  2

CH1•CH2

—

(5) Set the following settings.

When connecting a microphone
Set the INPUT LEVEL selector to MIC or MIC ATT. When set to MIC ATT, you
can reduce the volume by about +20 dB. And set the +48V switch to ON if the
microphone is powered through its cable.
When connecting audio equipment
Set the +48 V switch to OFF and set the INPUT LEVEL selector to LINE.