Sharp SCL901 User Manual

✤

If you run into any problem using the camcorder, use the following table to troubleshoot the problem.

✤

If these instructions do not allow you to solve the problem, take a note of:

■

The model and serial number marked on the bottom of the camcorder.

■

Your warranty, if applicable.

✤

Then contact your nearest Samsung authorized service center.

◆

Check the battery pack (see page 19) or the AC power adapter.
(see page 18)

◆

Check the POWER, set it to CAMERA.  

◆

You have reached the end of the cassette.

◆

Check the record protection tab on the cassette. (see page 22) 

◆

You have left the camcorder set to STANDBY for more than 
5 minutes without using it. (see page 24)

◆

The battery pack is fully used up. (see page 21) 

◆

The atmospheric temperature is too low. (see page 21)

◆

The battery pack has not been charged fully. (see page 19)

◆

The battery pack is completely dead, and cannot be recharged. 
Use another battery pack.

◆

The battery pack is fully used up.

◆

A mechanical fault might have occurred. (see page 64)

◆

The lithium battery is not installed or is  fully used up. 
(see page 17) 

◆

The video heads might be dirty. (see page 62)

◆

A mechanical fault might have occurred. (see page 64) 

You cannot switch the 
camcorder on.

Start/Stop does not operate
while shooting.

The camcorder goes off
automatically.

The battery pack is quickly
exhausted.

You cannot eject the cas-
sette from the compartment.

The DATE/TIME indicator
flashes more than 2 times
when you set the camcorder
to CAMERA.

The playback picture is poor.

You cannot operate any
functions on the camcorder.

00732M SCL901 SEA (46-71)  12/26/03 10:46 AM  Page 65