Sony HDR-TG3E User Manual

G DISP/BATT INFO button
You can switch the screen display when 
you press DISP/BATT INFO while the 
power is on.
You can check the remaining battery when 
you press it after you open the LCD panel 
and press POWER to turn off your 
camcorder.

H Built-in microphone
Sound picked up by the internal 
microphone is converted to 5.1ch surround 
sound and recorded.

I Access lamp
When the access lamp is lit or flashing, 
your camcorder is writing/reading data on 
the “Memory Stick PRO Duo.”

J POWER button
Press POWER to turn on your camcorder. 
When you press it while the power is on, 
your camcorder turns off.

• When you press POWER to turn on your 

camcorder while the LCD panel is closed, your 
camcorder goes to sleep mode. When you press 
POWER while sleep mode, your camcorder 
turns off.

M Tripod receptacle (Bottom surface)
Attach a tripod (optional) to the tripod 
receptacle using a tripod screw (optional: 
the length of the screw must be less than 5.5 
mm (7/32 in.)).

O Hook for wrist strap (Bottom surface)
Attach the strap and place your hand 
through the loop to prevent the camcorder 
from damage by being dropped.

K HDMI OUT jack
Connect with the HDMI cable (optional).

L A/V Remote Connector/A/V OUT 

Connect with the component A/V cable or 
A/V connecting cable.

N Interface connector (Bottom surface)
Connect your camcorder and the Handycam 
Station or the Dedicated USB Terminal 
Adaptor.
By attaching the Dedicated USB Terminal 
Adaptor, you can connect the USB cable to 
your camcorder without using the 
Handycam Station.

P

Create a disc by connecting the camcorder 
to a computer, etc. For details, see “PMB 
Guide” (p. 28).

Q Interface connector (Handycam 

Connect to the interface connector on your 
camcorder when you attach your camcorder 
to the Handycam Station.

R  (USB) jack
Connect with the USB cable.

• For HDR-TG3E: output only