Sony HDR-XR100 User Manual

Page of 133
17
Table of C
on
ten
ts
U
seful R
ec
or
ding 
Techniques
Inde
x
About storage of the battery pack
If the battery pack is not used for a long time, 
fully charge the battery pack and use it up on 
your camcorder once a year to maintain proper 
function. To store the battery pack, remove it 
from your camcorder and put it in a dry, cool 
place.
To discharge the battery pack on your 
camcorder completely, touch   (HOME)  
 (SETTINGS)  [GENERAL SET]  
[A.SHUT OFF]  [NEVER], and leave your 
camcorder in recording standby until the power 
goes off (p. 97).
About battery life
Battery capacity decreases over time and 
through repeated use. If decreased usage time 
between charges becomes significant, it is 
probably time to replace it with a new one.
Each battery’s life is governed by storage, 
operating and environmental conditions.
About x.v.Color
x.v.Color is a more familiar term for the xvYCC 
standard proposed by Sony, and is a trademark 
of Sony.
xvYCC is an international standard for color 
space in video. This standard can express a 
wider color range than the currently used 
broadcast standard.
About handling of your camcorder
On use and care
Do not use or store the camcorder and 
accessories in the following locations:
Anywhere extremely hot, cold or humid. 
Never leave them exposed to temperatures 
above 60 
C (140 
F), such as under direct 
sunlight, near heaters or in a car parked in 
the sun. They may malfunction or become 
deformed.
Near strong magnetic fields or mechanical 
vibration. The camcorder may malfunction.
Near strong radio waves or radiation. The 
camcorder may not be able to record properly.
Near AM receivers and video equipment. 
Noise may occur.
On a sandy beach or anywhere dusty. If 
sand or dust gets in your camcorder, it may 
malfunction. Sometimes this malfunction 
cannot be repaired.
Near windows or outdoors, where the LCD 
screen, or the lens may be exposed to direct 
sunlight. This damages the LCD screen.
Operate your camcorder on DC 6.8 V/7.2 V 
(battery pack) or DC 8.4 V (AC Adaptor).
For DC or AC operation, use the accessories 
recommended in these operating instructions.
Do not let your camcorder get wet, for example, 
from rain or sea water. If your camcorder 
gets wet, it may malfunction. Sometimes this 
malfunction cannot be repaired.
If any solid object or liquid gets inside the 
casing, unplug your camcorder and have it 
checked by a Sony dealer before operating it 
any further.
Avoid rough handling, disassembling, 
modifying, physical shock, or impact such 
as hammering, dropping or stepping on the 
product. Be particularly careful of the lens.
Keep the LCD screen closed when you are not 
using your camcorder.
Do not wrap your camcorder with a towel, for 
example, and operate it. Doing so might cause 
heat to build up inside.
When disconnecting the power cord (mains 
lead), pull it by the plug and not the cord (lead) 
(mains lead).
Do not damage the power cord (mains lead) 
such as by placing anything heavy on it.
Do not use a deformed or damaged battery 
pack.
Keep metal contacts clean.
Keep the Wireless Remote Commander and 
button-type battery out of children’s reach. If 
the battery is accidentally swallowed, consult a 
doctor immediately.
If the battery electrolytic liquid has leaked:
Consult your local authorized Sony service 
facility.
Wash off any liquid that may have contacted 
your skin.
If any liquid gets in your eyes, wash with 
plenty of water and consult a doctor.
When not using your camcorder for a 
long time
To keep your camcorder in optimum state for a 
long time, turn it on and let it run by recording