Sony DVW-790WS/790WSP User Manual
4-17
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1
4-2-2. Brush Assembly Replacement for Slip Ring
Overviews
Replacement
Brush Cover Removal
Brush Assembly Removal
Brush Assembly Installation
Brush Cover Installation
Notes
If the brush worn out, replace the brush assembly.
Once the brush assembly is attached referring to the following procedures, the relative height and contact
pressure against the slip ring will be automatically adjusted.
Never clean surface of the brush using a cleaning cloth moistened with cleaning fluid.
Once the brush assembly is attached referring to the following procedures, the relative height and contact
pressure against the slip ring will be automatically adjusted.
Never clean surface of the brush using a cleaning cloth moistened with cleaning fluid.
Preparations
1.
Turn the power off.
2.
Remove the front lid and the outside panel. (Refer to section 1-6 of Maintenance Manual Part 1.)
n
The brush assembly can be replaced when the cassette compartment is attached to the unit.
The brush assembly can be replaced when the cassette compartment is attached to the unit.
Tools
. Torque screwdriver bit (for M2) : J-6325-380-A
. Torque screwdriver (for 3 kg)
. Torque screwdriver (for 3 kg)
: J-6325-400-A
4-2. Parts Replacement