Sony DVW-790WS/790WSP User Manual

3-13

DVW-790WS/709WS/707

DVW-790WSP/709WSP/707P P2V1

3-2. Replacing the CCD Unit and Its Components

m
. The filter disk unit used in the DVW-707/707P

cannot be removed because it is built into a

single body with the CCD unit.

. Be sure to replace the filter disk unit in a dust-

free atmosphere such as a clean room.

1.

Remove the CCD unit.
(Refer to Section 3-2-1.)

2.

Remove the two screws and disconnect the
harness from the connector (CN3) on the DR-
387 board, and then slowly lift the filter disk

unit out.

1.

Reinstall the new filter disk unit using the

two screws removed in step 2 of the removal

procedure. And then reconnect the harness of

the filter disk unit to the connector (CN3) on

the DR-387 board.
n
Do not contact the surface of the filter disk

unit during installation.

2.

Reinstall the CCD unit on the front frame

assembly using the four hexagon socket bolts.

Standard tightening torque :

80 

x 10

_2

 N

.m {8 kgf.cm}

3.

Reinstall the CCD unit.

(Refer to Section 3-2-1.)

Adjustment after Filter Disk Unit Replacement

(Refer to Section 7-21

*1

 or 8-20

*2

.)

*

1: For DVW-790WS/790WSP/709WS/709WSP only

*

2: DVW-707/707P only

K 3

x

6

Filter disk unit

CN3

DR-387 board