Sony HDR-UX1 Manual

Page of 155
44
Recording the images (Continued)
the disc on the device that supports 5.1ch 
surround sound. 
For details, refer to the instruction manual 
of your wireless microphone.
*
Optional wireless microphone is not available in 
all countries/regions.
Press   (flash) repeatedly to select an 
appropriate setting.
No indication (Auto flash): Automatically 
flashes when there is insufficient ambient 
light.
r
 (Forced flash): Always uses the flash 
regardless of the surrounding brightness.
r
 (No flash): Records without flash.
b
Notes
• The recommended distance to the subject when 
using the built-in flash is approximately 0.5 to 
2.5 m (1 5/8 to 8 feet).
• Remove any dust from the surface of the flash 
lamp before using it. Flash effect may be 
impaired if heat discoloration or dust obscures 
the lamp.
• The flash charge lamp flickers while charging 
the flash, and remains lit when the battery 
charge is complete. 
• If you use the flash in bright places such as 
when shooting a backlit subject, the flash may 
not be effective.
• When attaching a conversion lens (optional) or a 
filter (optional) to your camcorder, the flash 
light does not emit light.
z
Tips
• You can change the brightness of the flash by 
setting [FLASH LEVEL] (p. 87), or you can 
prevent the redeye by setting [REDEYE 
REDUC] (p. 87).
You can record high quality still images on 
the “Memory Stick Duo” while recording a 
movie on the disc.
1
Press START/STOP to start movie 
recording.
2
Press PHOTO fully.
After you start recording, and before you 
finish, you can select up to 3 frames of still 
images from your movie.
3
Press START/STOP to stop movie 
recording.
Stored still images appear one by one, and 
the images are stored onto the “Memory 
Stick Duo.”  When 
 disappears, the 
image has been recorded.
b
Notes
• Do not eject the “Memory Stick Duo” before 
recording is finished and the still images are 
stored on the “Memory Stick Duo.”
• You cannot use the flash during Dual Rec.
Using the flash
Flash
Flash charge 
lamp
Recording high quality still 
images during movie recording 
(Dual Rec)
Orange color 
boxes indicate the 
number of 
recorded images. 
When recording is 
finished, the color 
changes to orange.