Sony DVW-970P User Manual
145
Menu List
Ap
pend
pend
ix
e
s
MAINTENANCE Menu
The following table lists and describes the items in the
MAINTENANCE menu.
When the setting range in the Settings column is
surrounded by parentheses ( ), the setup value is a relative
value. The setting range shown on the menu screen may
differ from what is shown in the manual.
MAINTENANCE menu.
When the setting range in the Settings column is
surrounded by parentheses ( ), the setup value is a relative
value. The setting range shown on the menu screen may
differ from what is shown in the manual.
No.
Page
Item
Settings
Default
Description
M01
WHT SHADING
WHT SHAD CH
SEL
SEL
R/G/B/TEST
R
Selects the channel adjusted by this menu. If
TEST is selected, the setting is the same as
the setting of TEST OUT SELECT.
TEST is selected, the setting is the same as
the setting of TEST OUT SELECT.
TEST OUT SELECT ENC/R/G/B
ENC
Selects the signal output to the TEST OUT
connector.
R/G/B WHT H SAW
(–99 to +99)
0
Adjusts the H Saw white shading
compensation.
compensation.
R/G/B WHT H PARA (–99 to +99)
0
Adjusts the H Parabola white shading
compensation.
compensation.
R/G/B WHT V SAW
(–99 to +99)
0
Adjusts the V Saw white shading
compensation.
compensation.
R/G/B WHT V PARA (–99 to +99)
0
Adjusts the V Parabola white shading
compensation.
compensation.
WHITE SAW/PARA
OFF/ON
ON
Turns white shading Saw and Parabola
compensation on and off.
compensation on and off.
M02
BLK SHADING
BLK SHAD CH SEL
R/G/B/TEST
R
Selects the channel adjusted by this menu. If
TEST is selected, the setting is the same as
the setting of TEST OUT SELECT.
the setting of TEST OUT SELECT.
TEST OUT SELECT ENC/R/G/B
ENC
Selects the signal output to the TEST OUT
connector.
R/G/B BLK H SAW
(–99 to +99)
0
For the H Saw black shading compensation
R/G/B BLK H PARA
(–99 to +99)
0
For the H Parabola black shading
compensation
compensation
R/G/B BLK V SAW
(–99 to +99)
0
For the V Saw black shading compensation
R/G/B BLK V PARA
(–99 to +99)
0
For the V Parabola black shading
compensation
compensation
BLACK SAW/PARA
OFF/ON
ON
Turns black shading Saw and Parabola
compensation on and off.
compensation on and off.
MASTER BLACK
(–99 to +99)
0
Adjusts the master black level.
MASTER
GAIN(TMP)
GAIN(TMP)
–3/0/3/6/9/12/18/
24/30/36/42/48 dB
24/30/36/42/48 dB
0 dB
Temporarily adjusts the master gain value.
M03
LEVEL ADJ
ENC VIDEO LEVEL (–99 to +99)
0
Adjusts the encoder video level.
RGB LEVEL
(–99 to +99)
0
Adjusts the R/G/B video level.
TEST OUT SELECT ENC/R/G/B
ENC
Selects the signal output to the TEST OUT
connector.
H BLANKING
WIDTH
WIDTH
(–99 to +99)
0
Adjusts the H blanking width.