Sony DVW-970/970P User Manual

Page of 159
91
Adjustments and Settings from Menus
  Chap
te
r 5
   Men
u
 Dis
p
la
ys 
a
nd Det
a
iled
 S
e
ttin
gs
16:9 mode indicator on the color bar display
5-3-9 Setting the CCD Scan Mode
Since the camcorder has CCDs that use an “all pixels read-
out method,” a progressive scan mode is also available in 
addition to the conventional interlace scan mode.
You can select either of the following modes using the 
FORMAT page of the OPERATION menu.
• I (interlace scan) mode
• PsF (progressive scan) mode
Installing the CBK-FC01 allows you to select the 24P 
mode (DVW-970 only).
Each mode is described below using timing charts.
I (interlace scan) mode
Interlace scan mode timing chart
The video signal of an odd scanning line and that of an 
even scanning line are output from the CCD alternately. 
Thus, the timing of the odd-field video signal and even-
field video signal are different.
PsF (progressive scan) mode
Progressive scan mode timing chart
The video signal of an odd scanning line and that of an 
even scanning line are output from the CCD at the same 
time. Then they are sent to the memory and separated into 
odd-field and even-field scanning lines. Thus the timing of 
an odd-field video signal and an even-field video signal are 
the same.
Color bars (SMPTE type)
Color bars (EBU type)
CCD output
Video output signal
O: Odd 
E: Even
CCD output
Video output signal
O: Odd 
E: Even