Sony DVW-709WS/709WSP User Manual
4-121
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1
4-3. Mechanical Adjustments
4-3-2. FWD Back Tension Adjustment
Note
When replacing the brake band assembly or S reel table assembly, or carrying out the tension regulator
operating position adjustment, be sure to carry out FWD back tension adjustment.
operating position adjustment, be sure to carry out FWD back tension adjustment.
Preparations
1.
Check that the unit is in the unthreading end mode.
2.
Remove the front lid and the outside panel. (Refer to section 1-6 of Maintenance Manual Part 1.)
n
For this adjustment, it is recommended to attach the cassette compartment to the unit.
If the cassette compartment does not attach to the unit, interrupt the photo interrupter (cassette compartment
For this adjustment, it is recommended to attach the cassette compartment to the unit.
If the cassette compartment does not attach to the unit, interrupt the photo interrupter (cassette compartment
lock switch) mounted on the SE-210 board using a black paper or equivalent so that the unit is in the cassette
lock state. After placing a weight on a FWD back tension measuring cassette tape so as not to rise it up,
carry out this adjustment.
lock state. After placing a weight on a FWD back tension measuring cassette tape so as not to rise it up,
carry out this adjustment.
Tool
FWD back tension measuring cassette tape
: J-6323-890-A