Sony DVW-709WS/709WSP User Manual
7-34
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1
7-21. Adjustment After Replacing the
Filter Disk Unit
After replacing the filter disk, the white balance adjustment
must be corrected. Follow the correction procedure
described below.
described below.
Preparation
. WHITE BAL switch (on the inside panel)
→
Position
A or B
. Shoot a fully occupied white area of pattern box in the
underscanned monitor frame.
. Lens IRIS
→
AUTO
Adjustment Procedure
Equipment : Color monitor
1.
On the setup menu, set as follows.
PAGE
PAGE
: S55
*ND COMP.
ITEM
: ND DETECTION
→
EXEC
2.
Set the filter knob to the “1B” position.
3.
AUTO W/B BAL switch (front panel)
→
WHT
(Perform the automatic white balance adjustment.)
n
Check that the indication “ND1 DET. = OK!” appears
n
Check that the indication “ND1 DET. = OK!” appears
on the color monitor after the automatic white balance
adjustment is completed.
adjustment is completed.
4.
Set the filter knob to the “2B” to “4B” positions in
turn, and perform step 3 for each position.
n
When the adjustment is completed for all knob
positions “1B” to “4B”, the indication “COMPLETE!”
n
When the adjustment is completed for all knob
positions “1B” to “4B”, the indication “COMPLETE!”
appears and the ITEM setup returns automatically to
the OFF position.
the OFF position.
7-21. Adjustment After Replacing the Filter Disk Unit