Sony HDR-CX7EK User Manual
21
Ge
tt
tt
in
g
S
ta
rte
d
• It takes a few seconds for your camcorder to be
ready to shoot after the power is turned on. You
cannot operate your camcorder during this time.
cannot operate your camcorder during this time.
• The lens cover opens automatically when the
power is turned on. It closes when the playback
screen is selected, or the power is turned off.
screen is selected, or the power is turned off.
• In the setting at the time of purchase, the power
turns off automatically if you leave your
camcorder without any operation attempted for
approximately 5 minutes, to save battery power
([A.SHUT OFF], p. 69).
camcorder without any operation attempted for
approximately 5 minutes, to save battery power
([A.SHUT OFF], p. 69).
z
Tips
• The date and time does not appear during
recording, but they are automatically recorded
on the “Memory Stick PRO Duo,” and can be
displayed during playback ([DATA CODE],
p. 65).
on the “Memory Stick PRO Duo,” and can be
displayed during playback ([DATA CODE],
p. 65).
• Refer to page 88 for information concerning
“World time difference.”
• If the buttons on the touch panel do not work
correctly, adjust the touch panel
(CALIBRATION, p. 94).
(CALIBRATION, p. 94).
You can change the on-screen displays to
show messages in a specified language. To
select the screen language, touch
show messages in a specified language. To
select the screen language, touch
(HOME)
t (SETTINGS)
t [CLOCK/
LANG]
t [
LANGUAGE SET]
Changing the language setting
Step 4: Adjusting the
camcorder to suit you
camcorder to suit you
Open the LCD panel 90 degrees to the
camcorder (1), then rotate it to the best
angle to record or play (2).
camcorder (1), then rotate it to the best
angle to record or play (2).
To turn off the LCD backlight to make
the battery last longer
the battery last longer
Press and hold DISP/BATT INFO for a few
seconds until
seconds until
appears.
This setting is practical when you use your
camcorder in bright conditions or you want
to save battery power. The recorded image
will not be affected by the setting. To turn
on the LCD backlight, press and hold DISP/
BATT INFO for a few seconds until
camcorder in bright conditions or you want
to save battery power. The recorded image
will not be affected by the setting. To turn
on the LCD backlight, press and hold DISP/
BATT INFO for a few seconds until
disappears.
b
Notes
• Do not press the buttons beside the LCD screen
accidentally when you open or adjust the LCD
panel.
panel.
z
Tips
• If you open the LCD panel 90 degrees to the
camcorder, then rotate it 180 degrees to the lens
side, you can close the LCD panel with the LCD
screen facing out. This is convenient during
playback operations.
side, you can close the LCD panel with the LCD
screen facing out. This is convenient during
playback operations.
• Touch
(HOME)
t
(SETTINGS)
t
[SOUND/DISP SET]
t [LCD BRIGHT]
(p. 66), and adjust the brightness of the LCD
screen.
screen.
• The information is displayed or hidden (display
y no display) each time you press DISP/
BATT INFO.
BATT INFO.
Adjusting the LCD panel
1
90 degrees to the
camcorder
2
180 degrees
(max.)
2
90 degrees
(max.)
DISP/BATT INFO