Sony DCR-VX2100E User Manual

z

MELODY

NORMAL

OFF

z

ON

OFF

z

LCD

V-OUT/LCD

z

ON

OFF

z

OFF

ON

To chime a melody in normal operations, and beep
a warning sound for five seconds.

To beep in the following situations:
When you turn on the power, the recording starts/
stops, or a warning message appears.

To cancel the melody, beep, and shutter click sound.

To activate the Remote Commander supplied with
your camcorder.

To deactivate the Remote Commander to avoid
remote control misoperation caused by an other
VCR’s remote control.

To show the display on the LCD screen and
viewfinder screen.

To show the display on a TV screen, LCD screen
and viewfinder screen.

To light up the camera recording lamps at the front
and rear of your camcorder.

To turn the camera recording lamps off.

Does not display the colour bar.

Displays the colour bar.

To make programs and perform video editing
(p. 123).

To adjust and set the synchronization of your
camcorder and a VCR for dubbing in video
program editing mode (p. 112).

VCR
CAMERA

MEMORY

VCR
CAMERA

MEMORY

VCR
CAMERA

MEMORY

CAMERA
MEMORY

CAMERA

VCR

VCR

Note
If you press DISPLAY with DISPLAY set to V-OUT/LCD in the menu settings, the picture from a
TV or VCR will not appear on the LCD screen even when your camcorder is connected to outputs
on the TV or VCR (except using an i.LINK cable).

When recording a close subject
When REC LAMP is set to ON, the red camera recording lamps on the front and rear of the
camcorder may reflect on the subject if it is close. In this case, we recommend you set REC LAMP
to OFF.

After more than five minutes after removing the power source
The “PROG. SCAN,” “HiFi SOUND,” “AUDIO MIX,” “MIC LEVEL,” and “COMMANDER”
items are returned to their default settings.
The other menu items are held in memory even when the power source is removed.