Sony HDR-FX1E User Manual

Read this first

Before operating the unit, please read this
manual thoroughly, and retain it for future
reference.

WARNING

To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
To avoid electrical shock, do not open
the cabinet. Refer servicing to qualified
personnel only.

Notice

If static electricity or electromagnetic causes data
transfer to discontinue midway (fail), restart the
application or disconnect and connect the i.LINK
cable again.

FOR CUSTOMERS IN THE UNITED
KINGDOM

NOTICE ON THE SUPPLIED AC
ADAPTOR

A moulded plug complying with BS1363 is fitted to
this equipment for your safety and convenience.

Should the fuse in the plug supplied need to be
replaced, a fuse of the same rating as the supplied one
and approved by ASTA or BSI to BS1362 (i.e.,
marked with

mark) must be used.

If the plug supplied with this equipment has a
detachable fuse cover, be sure to attach the fuse cover
after you change the fuse. Never use the plug without
the fuse cover. If you should lose the fuse cover, please
contact your nearest Sony service station.

FOR CUSTOMERS IN EUROPE

ATTENTION

The electromagnetic fields at the specific frequencies
may influence the picture and sound of this camcorder.

This product has been tested and found compliant with
the limits set out in the EMC Directive for using
connection cables shorter than 3 meters (9.8 feet).