Sony HDR-FX1E User Manual

Recording

Select the number of the picture profile
to be reset by turning the SEL/PUSH
EXEC dial, then press the dial.

Select [SETTING] by turning the SEL/
PUSH EXEC dial, then press the dial.

Select [RESET] by turning the SEL/
PUSH EXEC dial, then press the dial.

Select [YES] by turning the SEL/PUSH
EXEC dial, then press the dial.
If you decide not to reset the picture profile,
select [NO].

Press PICTURE PROFILE.

Note

• If you adjust all of the iris, shutter speed and gain

manually, you cannot obtain the effect of [AE
SHIFT].

• If you adjust the iris manually, you cannot obtain the

effect of [AT IRIS LMT].

• If the object is s bright that the aperture value set in

[AT IRIS LMT] is not appropriate, the shutter speed
may reach 1/1750 automatically.

• If you adjust the gain manually, you cannot obtain

the effect of [AGC LIMIT].

• If you select [CINEFRAME 25] when the shutter

speed is slower than 1/12, the shutter speed is
automatically set to 1/25.

Adjusting the audio recording
level – Microphone volume level

You can adjust the microphone volume when
recording. Checking the volume with
headphones is recommended.

Open the cover and set the AUTO/
MAN switch to MAN.

The audio level meter appears.

During recording or in the standby
mode, adjust the volume by turning
the AUDIO LEVEL dial.

To restore automatic adjustment

Set the AUTO/MAN switch to AUTO.

Note

• You cannot adjust the volume of audio input from

the AUDIO/VIDEO jack or the

HDV/DV jack.

Tip

• To check the audio setting information in greater

detail, press STATUS CHECK (p. 24). You can also
check the microphone volume during automatic
adjustment.