Sony HDR-FX1E User Manual
Playback
42
Playback
Viewing movies
Make sure you have a recorded cassette
inserted into your camcorder.
Some of the operations are possible using the
Remote Commander.
When you want to play back recordings on
your TV, see page 46.
When playing back the tape, select the
inserted into your camcorder.
Some of the operations are possible using the
Remote Commander.
When you want to play back recordings on
your TV, see page 46.
When playing back the tape, select the
(IN/OUT REC) menu, [VCR HDV/DV],
then [AUTO] (the default setting).
then [AUTO] (the default setting).
1
Open the LCD panel and adjust the
angle.
angle.
2
While pressing the green button, set
the POWER switch to VCR.
the POWER switch to VCR.
3
Press
m
(rewind) to go to the point
you want to view.
4
Press N (play) to start playback.
To adjust the volume
Adjust the volume by pressing VOLUME
– (decrease) / + (increase).
– (decrease) / + (increase).
To stop playback
Press x (stop).
To pause
Press X (pause) during playback.
Press N (play) or X (pause) again to restart the
playback.
Playback stops automatically when the pause
mode continues for more than 5 minutes.
Press N (play) or X (pause) again to restart the
playback.
Playback stops automatically when the pause
mode continues for more than 5 minutes.
To fast forward or rewind
Press M (fast forward) or m (rewind) in stop
mode.
mode.
To review movies on the viewfinder
Close the LCD panel. Then, adjust the
viewfinder angle.
viewfinder angle.
Indicators displayed during tape
playback
playback
A Format of the playback signal
(HDV1080i or DV) / Recording mode (SP
or LP)
or LP)
B Remaining battery
C Tape transport indicator
D Time code (hour: minute: second: frame)
C Tape transport indicator
D Time code (hour: minute: second: frame)
or tape counter (hour: minute: second)
The time code of this camcorder is of the
drop-frame system.
The time code of this camcorder is of the
drop-frame system.
POWER switch
0 : 0 0 : 0 0 : 0 0
6 0
min
6 0
min
HDV1080
i