Sony HVR-V1E User Manual
43
HVR-V1E/V1P
2-887-521-12(1)
L:\SONY\PV\CX91030\1130insatuPDF\2887521121_GB\2887521111HVRV1UVIN\01GB05BAS.
fm
fm
R
e
cor
d
d
in
g
/Play
ba
ck
ck
You can adjust the white balance according
to the light of the recording environment.
You can set two sets of white balance
adjustment data separately in memory A
and memory B for two different recording
conditions with
to the light of the recording environment.
You can set two sets of white balance
adjustment data separately in memory A
and memory B for two different recording
conditions with
A and
B. During
recording, you can select the setup data
with the SEL/PUSH EXEC dial. The setup
data will be retained as long as it is not
readjusted even if the power is
disconnected.
with the SEL/PUSH EXEC dial. The setup
data will be retained as long as it is not
readjusted even if the power is
disconnected.
1
During recording or standby, set
the AUTO LOCK switch A to the
center position to release the
auto lock mode.
the AUTO LOCK switch A to the
center position to release the
auto lock mode.
2
Press the WHT BAL button B.
3
Display desired item by turning
the SEL/PUSH EXEC dial C, then
press the dial.
the SEL/PUSH EXEC dial C, then
press the dial.
The display changes.
A
t
B
t
(Outdoor)
t n (Indoor)
z
Tip
• You can change the white balance value for
(Outdoor) by pressing and turning the SEL/
PUSH EXEC dial when
(Outdoor) is
selected. The value can be set between -
7(bluish) and +7 (reddish). The default value is
0.
7(bluish) and +7 (reddish). The default value is
0.
To save the adjusted white balance
value in memory A or B
value in memory A or B
1
Select
A or
B according to step
3 of “Adjusting to Natural Color (White
Balance).”
Balance).”
2
Shoot something white (such as a sheet
of paper) full-screen under the same
lighting conditions as the subject.
of paper) full-screen under the same
lighting conditions as the subject.
3
Press the SEL/PUSH EXEC dial C.
Pressing the dial switches between
blinking
Pressing the dial switches between
blinking
A and
B.
When the white balance is adjusted,
A or
B stops blinking and remains
on. The adjusted value is now saved in
the selected
the selected
A or
B memory.
Adjusting to Natural Color
(White balance)
(White balance)
B
C
A
Indicator
Shooting conditions
A
(MEMORY A)
B
(MEMORY B)
• White balance values
adjusted for light
sources can be stored
in memory A and
memory B. Follow the
steps below
sources can be stored
in memory A and
memory B. Follow the
steps below
(
Outdoor)
• Recording a sunset/
sunrise, just after
sunset, just before
sunrise, neon signs, or
fireworks.
sunset, just before
sunrise, neon signs, or
fireworks.
• Under daylight color
fluorescent lamps
n
(Indoor)
• Under the lighting
condition that changes
quickly
quickly
• Under strong light
such as in a
photography studio
photography studio
• Under sodium lamps
or mercury lamps
Continued
,