Sony HVR-Z1E/Z1P User Manual
Additional Information
116
When labeling the cassette
Be sure to place the label only on the locations
as shown in the following illustration so as not
to cause malfunction of your camcorder.
Be sure to place the label only on the locations
as shown in the following illustration so as not
to cause malfunction of your camcorder.
After using the cassette
Rewind the tape to the beginning to avoid
distortion of the picture or the sound. The
cassette should then be put in its case, and stored
in an upright position.
Rewind the tape to the beginning to avoid
distortion of the picture or the sound. The
cassette should then be put in its case, and stored
in an upright position.
When cleaning the gold-plated
connector
Generally, clean the gold-plated connector on a
cassette with a cotton-wool swab after every 10
times it has been ejected.
If the gold-plated connector on the cassette is
dirty or dusty, the remaining tape indicator may
not be indicated correctly.
connector
Generally, clean the gold-plated connector on a
cassette with a cotton-wool swab after every 10
times it has been ejected.
If the gold-plated connector on the cassette is
dirty or dusty, the remaining tape indicator may
not be indicated correctly.
b
Note
• Your camcorder is not compatible with Cassette
Memory.
and are
trademarks.
HDV and
are trademarks of
Sony Corporation and Victor Company of
Japan Ltd.
Japan Ltd.
All other product names mentioned herein may
be the trademarks or registered trademarks of
their respective companies.
Furthermore, “™” and “®” are not mentioned
in each case in this manual.
be the trademarks or registered trademarks of
their respective companies.
Furthermore, “™” and “®” are not mentioned
in each case in this manual.
Do not put a label
along this border.
along this border.
Labeling position
Gold-plated
connector
connector