Sony HVR-Z1E/Z1P User Manual
Getting started
14
* With the LCD BACKLIGHT switch set to ON.
b
Note
• Figures are those of 60 Hz. They may be slightly
longer at 50 Hz.
• The recording and playback time will be shorter
when you use your camcorder in low temperature.
• The battery life will be slightly shorter when you use
both of the LCD panel and the viewfinder than when
you use only the LCD panel.
you use only the LCD panel.
• The battery information will not be correctly
displayed when the battery pack is discharged.
Using an outside power source
You can use the AC Adaptor/charger as the
power source when you do not want the
battery to run out.
power source when you do not want the
battery to run out.
PRECAUTION
Even if your camcorder is turned off, AC power
(house current) is still supplied to it while
connected to the wall socket via the AC
Adaptor/charger.
Even if your camcorder is turned off, AC power
(house current) is still supplied to it while
connected to the wall socket via the AC
Adaptor/charger.
1
Set the mode switch to VCR/
CAMERA.
CAMERA.
No power will be supplied if the mode
switch is set to CHARGE.
switch is set to CHARGE.
2
Attach the connecting cord (DK-415)
to the camcorder.
to the camcorder.
Press the attaching part of the connecting
cord (DK-415), and slide it down.
cord (DK-415), and slide it down.
3
Connect the connecting cord (DK-415)
to the AC Adaptor/charger.
to the AC Adaptor/charger.
4
Connect the mains lead to the AC
Adaptor/charger.
Adaptor/charger.
5
Connect the mains lead to the wall
socket.
socket.
Mode switch
AC Adaptor/
charger
charger
To the wall socket
Power cord
Connecting cord (DK-415)