Sony HVR-Z1E/Z1P User Manual
Recording
40
To connect the cable of the microphone
or audio device
or audio device
Align the pins of the plug to the INPUT1 or
INPUT2 connectors, and connect them
securely.
INPUT2 connectors, and connect them
securely.
Selecting the recording channel
The following settings are required to record
the audio source connected to the INPUT1 or
INPUT2 connector.
the audio source connected to the INPUT1 or
INPUT2 connector.
1
In the standby mode, press MENU.
2
Select the
(AUDIO SET) menu by
turning the SEL/PUSH EXEC dial,
then press the dial.
then press the dial.
3
Select [MIC SELECT] by turning the
SEL/PUSH EXEC dial, then press the
dial.
SEL/PUSH EXEC dial, then press the
dial.
4
Select [XLR] by turning the SEL/
PUSH EXEC dial, then press the dial.
PUSH EXEC dial, then press the dial.
5
Select [XLR SET] by turning the SEL/
PUSH EXEC dial, then press the dial.
PUSH EXEC dial, then press the dial.
6
Select [XLR CH SET] by turning the
SEL/PUSH EXEC dial, then press the
dial.
SEL/PUSH EXEC dial, then press the
dial.
7
Select a channel by turning the SEL/
PUSH EXEC dial, then press the dial.
PUSH EXEC dial, then press the dial.
8
Set [INPUT1 LEVEL] or [INPUT2
LEVEL], and the PHANTOM switch
for each connector.
LEVEL], and the PHANTOM switch
for each connector.
XLR connector (male)
Connector
XLR CH
SET
SET
Recorded
channel
channel
INPUT1
CH1
Channel 1
CH1, CH2
Channel 1
Channel 2
Channel 2
INPUT2
CH1
Channel 2
CH1, CH2
None
Source
Con-
nector
nector
Menu
PHAN-
TOM
switch
TOM
switch
Micro-
phone
phone
INPUT1
[INPUT1
LEVEL] –
[MIC]
LEVEL] –
[MIC]
ON
INPUT2
[INPUT2
LEVEL] –
[MIC]
LEVEL] –
[MIC]
ON