Sony HVR-Z1E/Z1P User Manual

Page of 136
Playback
52
Displaying the date/time and 
camera settings data – Data code
During playback, you can view the date/time 
data and the camera settings data that are 
automatically recorded while recording 
pictures on a tape.
1
Set the POWER switch to VCR.
2
Press DATA CODE on the camcorder 
or Remote Commander during 
playback or playback pause.
Each time you press the button, the 
indicators appear in turn as follows:
Date/time 
t Camera settings data t (no 
display)
Camera settings data display
In the date/time data display, the date and time 
is displayed in the same area.
If you record the picture without setting the 
clock, [--- -- ----] and [--:--:--] will appear.
SteadyShot off
Exposure
Aperture value
If you manually adjust the aperture value to 
the maximum, 
 appears.
Gain
Shutter speed
White balance
 appears when pictures recorded by 
using the shot transition function are played 
back.
To hide the camera settings data
Select the 
 (OTHERS) menu, [DATA 
CODE], then [DATE] (p. 81).
Each time you press DATA CODE, the date/
time indicator turns on and off.
Displaying the video information 
– Status check
You can check the setup value of the 
following items.
• Audio setup such as audio mix (p. 65)
• Output signal setup ([VCR HDV/DV], etc.) 
• Functions assigned to the ASSIGN buttons 
1
Press STATUS CHECK.
2
Turn the SEL/PUSH EXEC dial to 
display the desired item.
Each time you turn the dial, the items 
appear in the following order:
AUIDO 
t OUTPUT t ASSIGN
To turn off the video information
Press STATUS CHECK.
F 1 . 7
1 0 0
6 dB
0 0 : 0 0 : 0 0 : 0 0
AUTO
6 0
min
6 0
min
HDV1080
i