Sony HDR-XR550 User Manual

Adjusting the clock and the area
automatically (AUTO CLOCK ADJ/
AUTO AREA ADJ)

Your camcorder can maintain accurate

time and compensate for time difference

automatically, by acquiring time and

location information from GPS.



Touch

(MENU)  [Show

others]  [CLOCK/ LANG]
(under [GENERAL SET]
category)  [AUTO CLOCK
ADJ]/[AUTO AREA ADJ].



Touch a desired setting 



Notes

You must set the date and time on your

camcorder before using your camcorder (p. 15).

There may be discrepancies of a few seconds

even if [AUTO CLOCK ADJ] is activated.

The clock is adjusted automatically by

[AUTO CLOCK ADJ] when you turn off your

camcorder if the camcorder is receiving a GPS

signal while it is being used. The clock is not

adjusted until the camcorder is turned off. Also,

the clock is not adjusted unless the camcorder

is receiving a GPS signal, even if the GPS switch

is set to ON.

The [AUTO AREA ADJ] function automatically

compensates for a time difference when it

detects a time differences with the current area.

The clock may not be adjusted to the correct

time automatically, depending on the country/

region selected for your camcorder. In this case,

set [AUTO CLOCK ADJ] and [AUTO AREA

ADJ] to [OFF].



