Sony HDRMV1 Leaflet

HDR-MV1 4-479-706-11(1)

Recommended functions 

To adjust the recording sound level of the built-
in microphones

Select   on the recording screen.

To reduce low frequency sound such as that of 
air conditioners.

Select 

 



 [Camera/Audio] 



 [  Audio] 



 [Low Cut 

Filter] 



 [On].

To monitor sounds

Plug headphones into the 

 (headphones) jack. To adjust 

the volume, select   on the recording screen.

To synchronize the image on the LCD screen 
with the sound being monitored.

Select 

 



 [Camera/Audio] 



 [  Audio] 



 [Audio 

Output Timing] 



 [Lip Sync].

To use MTR (Multi Track Recorder) or an external 
microphone (sold separately)

Connect an MTR or external microphone to LINE IN jack 

of the camcorder. When the [Ext. Audio Input Set] screen 
appears, select the device you want to connect.

To record only sounds

Select 

 



 [Recording Mode] 



 [Audio].

To change the audio recording format

Select 

 



 [Camera/Audio] 



 [  Audio] 



 [Audio 

Format], and then select the desired format.

To change the movie recording mode

Select 

 



 [Image Quality/Size] 



 [

 REC Mode], 

and then select [1080] (1920x1080 30p) or [720] (1280x720 
30p).

To record without worrying about the battery 
level

Connect the AC-UD10 AC Adaptor (sold separately) to the 
camcorder with the battery installed.

Notes on use 

Notes on using your camcorder



 It is recommended to format the memory card with the 

camcorder before the first use.



 Confirm the direction of the memory card. If you forcibly insert 

the memory card in the wrong direction, the memory card, 
memory card slot, or contents data may be damaged.



 Compensation for the contents of recordings cannot be 

provided, even if recording or playback is not possible due to a 
malfunction of the camcorder, recording media, etc.



 During periods of extended recording, the temperature of 

the camcorder may rise to a point where recording stops 
automatically. With the power is turned off, leave the camcorder 
for 10 minutes or longer to allow the temperature inside to 
decrease to a safe level.



 Under high ambient temperatures, the temperature of the 

camcorder rises quickly.

Parts and controls 

 START/STOP button
 POWER button
 Lens cap
 Cap string
 Lens
 Recording lamp
 Microphones
 Speaker
 Loop for the cap string/the strap
 Battery cover
  (N mark)

NFC: Near Field Communication



 When the temperature of the camcorder rises, the image 

quality may deteriorate. It is recommended that you wait until 
the temperature of the camcorder drops before continuing to 
record.



 The surface of the camcorder may get hot. This is not a 

malfunction.



 Playback of contents recorded with other devices, is not assured 

on the camcorder.



 Use the nearby wall outlet (wall socket) when using the AC-

UD10 AC Adaptor (sold separately). Disconnect the AC Adaptor 
from the wall outlet (wall socket) immediately if any malfunction 
occurs while using the apparatus.



 MP4 movies recorded with [Audio Format] set to [Linear 

PCM] cannot be played back on some equipment or services, 
including Blu-ray Disc players (including Sony products). For 
detailed information, check the camcorder support page before 
use.

About the software



 The content management and editing software can be 

downloaded from the following URL:  
www.sony.net/pm/mvr/

Notice regarding wireless networks



 Sony bears no responsibility whatsoever for any loss or 

damages that may occur as a result of unauthorized access to 
or use of the access point registered to the camcorder if it is lost 
or stolen.

Specifications

Movie recording format: Video: MPEG-4 AVC/H.264, Audio:
MPEG-4 Linear PCM 2ch, MPEG-4 AAC LC 2ch 
Audio recording format: Linear PCM (WAV)
Power requirements: DC 3.6 V (Battery pack), DC 5 V 1 500 mA (AC 

Adaptor)

USB charging (Multi/Micro USB terminal): DC 5 V 800 mA
Average power consumption: 2.1 W (when recording movies at 

default settings)

Rechargeable battery pack NP-BX1: 

Maximum charge voltage: DC 4.2 V 
Maximum charge current: 1.89 A

For more specifications, refer to “Specifications” in the Music 
Video Recorder User Guide.
Design and specifications are subject to change without notice.

On trademarks



 “Memory Stick,”“

” and “Memory Stick Micro” are trademarks or registered 

trademarks of Sony Corporation.



 microSDXC logo is a trademark of SD-3C,LLC.



 The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI 

Logo are trademarks or registered trademarks of HDMI Licensing LLC in the 
United States and other countries.



 Mac, Mac OS and App Store are registered trademarks of Apple Inc.



 Android and Google Play are trademarks or registered trademarks of Google Inc.



 iOS is a registered trademark or trademark of Cisco Systems, Inc. and/or its 

affiliates in the United States and certain other countries.



 iPhone is a trademark or a registered trademark of Apple Inc.



 Wi-Fi, the Wi-Fi logo, Wi-Fi PROTECTED SET-UP, Wi-Fi Direct, WPA and WPA2 are 

registered trademarks of the Wi-Fi Alliance.



 The N mark is a trademark or registered trademark of NFC Forum, Inc. in the 

United States and in other countries.

All other product names mentioned herein may be the trademarks or 
registered trademarks of their respective companies. Furthermore, ™ and ® 
are not mentioned in each case in this manual.

If the battery pack is mishandled, the battery pack can burst, cause a 
fire or even chemical burns. Observe the following cautions.



 Do not disassemble.



 Do not crush and do not expose the battery pack to any shock or force 

such as hammering, dropping or stepping on it.



 Do not short circuit and do not allow metal objects to come into contact 

with the battery terminals.



 Do not expose to high temperature above 60°C (140°F) such as in direct 

sunlight or in a car parked in the sun.



 Do not incinerate or dispose of in fire.



 Do not handle damaged or leaking lithium ion batteries.



 Be sure to charge the battery pack using a genuine Sony battery charger 

or a device that can charge the battery pack.



 Keep the battery pack out of the reach of small children.



 Keep the battery pack dry.



 Replace only with the same or equivalent type recommended by Sony.



 Dispose of used battery packs promptly as described in the instructions.

Excessive sound pressure from earphones and headphones cause 
hearing loss.

Lithium-Ion batteries are recyclable.
You can help preserve our environment by returning 
your used rechargeable batteries to the collection and 
recycling location nearest you.

For more information regarding recycling of rechargeable batteries, 
call toll free
1-800-822- 8837, or visit http://www.call2recycle.org/
Caution: Do not handle damaged or leaking Lithium-Ion batteries.

This device complies with Part 15 of the FCC Rules. Operation is subject 
to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device 
must accept any interference received, including interference that may 
cause undesired operation.
CAN ICES-3 B/NMB-3 B
This equipment complies with FCC/IC radiation exposure limits set 
forth for an uncontrolled environment and meets the FCC radio 
frequency (RF) Exposure Guidelines in Supplement C to OET65 and 
RSS-102 of the IC radio frequency (RF) Exposure rules.
This equipment has very low levels of RF energy that are deemed to 
comply without testing of specific absorption ratio (SAR).



 Read these instructions.



 Keep these instructions.



 Heed all warnings.



 Follow all instructions.



 Do not use this apparatus near water.



 Clean only with dry cloth.



 Do not block any ventilation openings.



 Install in accordance with the manufacturer’s instructions.



 Do not install near any heat sources such as radiators, heat registers, 

stoves, or other apparatus (including amplifiers) that produce heat.



 Do not defeat the safety purpose of the polarized or grounding-type 

plug. A polarized plug has two blades with one wider than the other. A 
grounding-type plug has two blades and a third grounding prong. The 
wide blade or the third prong are provided for your safety. If the provided 
plug does not fit into your outlet, consult an electrician for replacement of 
the obsolete outlet.



 Protect the power cord from being walked on or pinched particularly at 

plugs, convenience receptacles, and the point where they exit from the 
apparatus.



 Only use attachments/accessories specified by the manufacturer.

 LCD screen
 

 (Playback) button

  (headphones) jack
 CHG (charge) lamp
 Multi/Micro USB terminal

Supports Micro USB compatible devices.

 Micro HDMI OUT jack
 LINE IN jack/  (microphone) jack (PLUG IN POWER)
 Multi-selector
 Tripod receptacle
 Memory card slot
 Memory card access lamp



 Use only with the cart, stand, tripod, bracket, or 

table specified by the manufacturer, or sold with the 
apparatus.  
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.



 Unplug this apparatus during lightning storms or when unused for long 

periods of time.



 Refer all servicing to qualified service personnel. Servicing is required 

when the apparatus has been damaged in any way, such as power-supply 
cord or plug is damaged, liquid has been spilled or objects have fallen into 
the apparatus, the apparatus has been exposed to rain or moisture, does 
not operate normally, or has been dropped.

UL is an internationally recognized safety organization.
The UL Mark on the product means it has been UL Listed.

If you have any questions about this product, you may call:

Sony Customer Information Center 1-800-222-SONY (7669).
The number below is for the FCC related matters only.

Declaration of Conformity
Trade Name: SONY
Model No.: HDR-MV1
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo, San Diego, CA 92127 U.S.A.
Telephone No.: 858-942-2230
This device complies with Part 15 of the FCC Rules. Operation is 
subject to the following two conditions: (1) This device may not 
cause harmful interference, and (2) this device must accept any 
interference received, including interference that may cause 
undesired operation.

This equipment must not be co-located or operated in conjunction 
with any other antenna or transmitter.

You are cautioned that any changes or modifications not expressly 
approved in this manual could void your authority to operate this 
equipment.

This equipment has been tested and found to comply with the limits 
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against 
harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency 
energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur 
in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined 
by turning the equipment off and on, the user is encouraged to try to 
correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to 

which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

The supplied interface cable must be used with the equipment in 
order to comply with the limits for a digital device pursuant to Subpart 
B of Part 15 of FCC Rules.
This device complies with Industry Canada licence-exempt RSS 
standard(s).
Operation is subject to the following two conditions: (1) this device 
may not cause interference, and (2) this device must accept any 
interference, including interference that may cause undesired 
operation of the device.

Hereby, Sony Corporation, declares that this HDR-MV1 Digital HD Video 
Camera Recorder is in compliance with the essential requirements and 
other relevant provisions of Directive 1999/5/EC. For details, please 
access the following URL:
http://www.compliance.sony.de/

Notice for the customers in the countries applying EU Directives
Manufacturer: Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-
0075 Japan
For EU product compliance:  Sony Deutschland GmbH, Hedelfinger 
Strasse 61, 70327 Stuttgart, Germany
This product has been tested and found compliant with the limits 
set out in the EMC regulation for using connection cables shorter 
than 3 meters (9.8 feet).
The electromagnetic fields at the specific frequencies may influence 
the picture and sound of this unit.

If static electricity or electromagnetism causes data transfer to 
discontinue midway (fail), restart the application or disconnect and 
connect the communication cable (USB, etc.) again.

This symbol on the product or on its packaging indicates that this 
product shall not be treated as household waste.
Instead it shall be handed over to the applicable collection point for 
the recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help 
prevent potential negative consequences for the environment and 
human health, which could otherwise be caused by inappropriate 
waste handling of this product. The recycling of materials will help 
to conserve natural resources. For more detailed information about 
recycling of this product, please contact your local Civic Office, your 
household waste disposal service or the shop where you purchased 
the product.

This symbol on the battery or on the packaging indicates that the 
battery provided with this product shall not be treated as household 
waste.
On certain batteries this symbol might be used in combination with 
a chemical symbol. The chemical symbols for mercury (Hg) or lead 
(Pb) are added if the battery contains more than 0.0005% mercury 
or 0.004% lead.
By ensuring these batteries are disposed of correctly, you will help 
prevent potentially negative consequences for the environment and 
human health which could otherwise be caused by inappropriate 
waste handling of the battery. The recycling of the materials will 
help to conserve natural resources.
In case of products that for safety, performance or data integrity 
reasons require a permanent connection with an incorporated 
battery, this battery should be replaced by qualified service staff 
only.
To ensure that the battery will be treated properly, hand over the 
product at end-oflife to the applicable collection point for the 
recycling of electrical and electronic equipment.
For all other batteries, please view the section on how to remove 
the battery from the product safely. Hand the battery over to the 
applicable collection point for the recycling of waste batteries.
For more detailed information about recycling of this product or 
battery, please contact your local Civic Office, your household waste 
disposal service or the shop where you purchased the product.