Sony F35 User Manual
22
Mounting the CA-F101 and Optical Connection
Cha
p
te
r 2
I
n
s
ta
llat
ion an
ion an
d Prep
ar
at
ions
2-3 Mounting the CA-
F101 and Optical
Connection
F101 and Optical
Connection
For optical connection between this camera and an SRW-
1, mount an HKSR-101 Optical Interface Unit on the
SRPC-1 HD Video Processor and an optional CA-F101
Optical Fiber Camera Adapter to the camera.
1, mount an HKSR-101 Optical Interface Unit on the
SRPC-1 HD Video Processor and an optional CA-F101
Optical Fiber Camera Adapter to the camera.
When using the CA-F101, confirm that the devices to be
used in combination match the following requirements:
• The HKSR-101 Optical Interface Unit has been mounted
used in combination match the following requirements:
• The HKSR-101 Optical Interface Unit has been mounted
on the SRPC-1 HD Video Processor.
• This camera is Ver. 1.3 or later.
• The SRW-1 and SRPC-1 are Ver. 2.6 or later.
• The SRW-1 and SRPC-1 are Ver. 2.6 or later.
For details, consult your Sony representative.
Mounting the CA-F101
The CA-F101 can be attached to the top or rear of the
camera head in the same manner as the interface box.
camera head in the same manner as the interface box.
For handling of the CA-F101, refer to the Operation
Manual of the CA-F101.
Manual of the CA-F101.
If the CA-F101 is attached to the top of the camera, the
viewfinder can be placed to a higher position by attaching
the viewfinder shoe supplied with the CA-F101 to the
adapter.
In this case, remove the camera’s viewfinder shoe to
eliminate possible interference.
viewfinder can be placed to a higher position by attaching
the viewfinder shoe supplied with the CA-F101 to the
adapter.
In this case, remove the camera’s viewfinder shoe to
eliminate possible interference.
For details on viewfinder attachment, see “2-5 Attaching a
Viewfinder” (page 24) and “Mounting–Attaching a
Viewfinder to the Adapter” in the Operation Manual of the
CA-F101.
Viewfinder” (page 24) and “Mounting–Attaching a
Viewfinder to the Adapter” in the Operation Manual of the
CA-F101.
For connection
Use an optional hybrid optical camera cable that conforms
to ARIB (BTA S-1005B), ANSI/SMPTE (304M-1998/
311M-1998), or EBU (R100-1999).
to ARIB (BTA S-1005B), ANSI/SMPTE (304M-1998/
311M-1998), or EBU (R100-1999).
For details on the connection, refer to the Operation
Manual of the CA-F101.
Manual of the CA-F101.
When power is applied, the video format of the camera is
automatically set to match that of the SRW-1. After that,
the format setting made either from the camera or the
SRW-1 becomes valid on both units.
automatically set to match that of the SRW-1. After that,
the format setting made either from the camera or the
SRW-1 becomes valid on both units.
Note
Note
Note
VTR
CAMERA
SRPC-1
+HKSR-101
SRW-1
Hybrid optical cable
CA-F101