Sony F35 User Manual

25

Mounting the Camera to a Tripod

  Cha

p

te

r 2  

 I

n

s

ta

llat
ion an

d Prep

ar

at

ions

When the supplied center handle is attached to the top of 
the camera head, you can attach the viewfinder to the 
viewfinder shoe of the center handle. In this case, first 
remove the viewfinder shoe from the camera head.

For details on the center handle, see “2-7-2 Center Handle 
(Supplied)” (page 26).

When the L handle is attached to the camera head, the 
attaching condition may be limited, owing to the 
viewfinder position and the rotating position of the hood.

Connect it to the VF2 connector.
Using the menus, you can specify the display condition 
independently of the viewfinder connected to the VF1 
connector.

When two viewfinders are connected at the same time (via 
the VF1 and VF2 connectors), the HDVF-C950W cannot 
be used because of a limitation of current capacity.

Loosen the viewfinder positioning ring, pull on the 
viewfinder stopper, then pull out the viewfinder by sliding 
it in the direction opposite that when attaching.

Two tripod receptacles (for 

3

/

8

” camera screws) are 

provided on the bottom of the camera head.

• Select an appropriate hole, considering the balance of the 

weight of the camera. If an inappropriate hole is selected, 
the camera may fall over.

• Check that the size of the selected hole matches that of 

the screw of the tripod. If they do not match, the camera 
cannot be attached to the tripod securely.

CTR

L

VF1

1

2

 Tripod receptacles